Description
Rim only, this is the decorative crystal face of a recessed downlight rather than a complete fitting. The square outer measures 90mm and the rim is shallow at 10mm, dropping into a 62mm cut-out, with clear cut crystal that breaks light up as it passes through. To finish it you need the matching component kit, which carries the lampholder and retaining ring; we stock those in polished chrome, satin black and aged brass. It is the sort of detail that only shows itself properly once the lamp behind it is lit.
It reads as a small piece of jewellery in the ceiling, so it earns its keep where people look up or pass close by: an entrance hall, a landing, a cloakroom, a dressing room, or a run above a bar or a dining table. We reach for these where a plain white bezel would look too flat and a pendant would only be in the way. Because dimming rests entirely on the lamp fitted behind it, choose dimmable lamps if you want the level to drop in the evening. It belongs in dry rooms indoors, away from steam and splashing.
The crystal is Diyas Select, clear throughout, and the square profile keeps the lines quiet next to plain plaster and simple joinery. Keep it looking well with a soft dry cloth or a clean brush for dust; if fingermarks appear, a barely damp cloth on the crystal and nothing more, with the power off and the lamp cold first. It carries a one year warranty. The same rim comes in round as well as square, with bubbled and chamfered faces through the range, and green and aqua crystal on some shapes, so a whole ceiling can be matched or deliberately mixed.
Specification
| Colour |
Clear |
| Weight |
0.12KG |
| Length |
90mm |
| Width |
90mm |
| Height |
10mm |
| Cut Out |
62mm |
| Materials Used |
Crystal |
| Crystal Type |
Diyas Select |
| Crystal Colour |
Clear |
| Lamp Cap |
Rim Only |
| Lamps Included |
No |
| Light Distribution |
Down |
| Protection Class |
Non-Electric |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. |
| Country of Origin |
China |
Frequently Asked
Is this a complete downlight?
No. It is the crystal rim on its own. The separate component kit supplies the lampholder and retaining ring needed to complete it, and we stock that kit in polished chrome, satin black and aged brass.
What size aperture does it need?
The cut-out is 62mm. The visible square face is 90mm by 90mm, so it covers the aperture with a modest border around it.
How shallow is the rim?
It stands 10mm in height, which keeps the crystal close to the ceiling line rather than sitting proud of it.
Can it be dimmed?
Yes, provided dimmable lamps are used behind it and a suitable dimmer is in place. Neither the lamp nor a dimmer comes with the rim.
What is the crystal?
Diyas Select crystal in a clear finish, cut so that the light passing through it sparkles.
Is it suitable for a bathroom or shower area?
It is rated IP20, so keep it to dry rooms rather than zones exposed to water or steam.