Description
Clear crystal gathered into a tight cluster and set within a round French gold rim, this is the decorative face of a recessed downlight rather than a complete fitting. The lampholder and retaining ring come as a separate component kit, so the rim is chosen purely on looks. It measures about 100mm across the visible edge and drops into a standard 62mm cut-out, which keeps it interchangeable with the rest of the range. Light passing through the faceted crystal breaks up as it leaves, scattering a little glitter around the main beam.
We reach for these where a plain white bezel would look too flat: a hallway ceiling, a dressing room, a small kitchen where the sparkle has something to bounce off. They suit dry rooms indoors, away from steam and splashing, so a shower zone is not the place for them. Dimming is possible where the lamp behind the rim and the control on the circuit both allow it. Anyone tidying up an existing run can change rims alone and shift the character of a whole ceiling.
The crystal is a select grade, cut so the facets stay sharp under a beam, and the gold finish on the surround reads warm rather than brassy. Keep it looking right with a soft dry cloth over the crystal, and keep polishes and solvents away from the metal. It carries a one year warranty. We stock the same cluster rim in polished chrome and in a smoked crystal, with bubble and chamfered rims in the range too, plus French gold component kits to match. The lamp itself sits in the kit behind the rim.
Specification
| Colour |
Clear |
| Second Colour |
French Gold |
| Weight |
0.14KG |
| Diameter |
100mm |
| Height |
25mm |
| Cut Out |
62mm |
| Materials Used |
Pressed Steel, Crystal |
| Crystal Type |
Diyas Select |
| Crystal Colour |
Clear |
| Lamp Cap |
Rim Only |
| Lamps Included |
No |
| Light Distribution |
Down |
| Protection Class |
Non-Electric |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. |
| Country of Origin |
China |
Frequently Asked
Is this a complete downlight?
No. It is the crystal rim only. You will also need the matching component kit, which carries the lampholder and retaining ring, to make up a working fitting.
What size aperture does it need?
It sits in a 62mm cut-out, with an overall visible diameter of 100mm and a height of 25mm.
Can it be dimmed?
Yes, provided the lamp fitted behind it is a dimmable type and a suitable dimmer is used. Neither the lamp nor the dimmer is supplied here.
How should the crystal be cleaned?
Dust it with a dry microfibre cloth. If marks remain, a barely damp cloth followed by a dry one is enough. Avoid metal polish and solvents, which can dull the gold surround.
Is it suitable for a bathroom?
It is rated IP20, so it belongs in dry rooms rather than in or near a shower, bath or basin splash area.
Does it come with a warranty?
It carries a one year warranty.