Description
A slender stem rises from a round weighted base and curves over at the top, finishing in an E27 lampholder that waits for the shade of your choosing. The satin nickel has a soft, low sheen rather than a mirror shine, so it reads quietly against pale walls and darker paint alike. The base is 25cm across, which keeps the footprint small, and the lamp stands 145cm tall, putting the light just above head height when you are seated. The shade and the lamp are not included; see our lamp shades.
This is the shape we suggest when a table lamp has nowhere to sit: it slips behind an armchair, beside the end of a sofa, or into the gap between a bed and a wall, and the arc carries the light out over your lap. Because the shade is chosen separately, you can pick a drum in linen for a soft wash, or something narrower if you want the light kept close. Fitted with a suitable lamp and used with a compatible dimmer, the output can be brought down for evenings.
The frame is metal throughout, plated and finished in satin nickel, with the weight in the base doing the work of holding the curve steady. To clean it, run a dry microfibre cloth along the stem now and then and lift dust from the base rim; skip metal polishes and sprays, as these can dull the plating over time. It is intended for dry rooms indoors on a standard household supply. It carries a one year warranty. We stock it in satin nickel, and it is a lamp we like pairing with a wide, shallow shade to fill a corner, or a tall tapered one where the light needs to stay tight to a chair. Shade and lamp are both chosen to suit, so neither is included.
Specification
| Colour |
Satin Nickel |
| Weight |
4.64KG |
| Diameter |
250mm |
| Height |
1450mm |
| Materials Used |
Iron |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
1 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED Lamp Dependant On Shade |
| Light Distribution |
Ambient |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Switch |
Yes - Foot Switch |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Included |
No |
| Pieces Included |
1 |
| Installation |
Plug-in Item |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Unplug the lamp before cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamp does it take, and what is the maximum wattage?
It takes one E27 lamp, up to 20W. An LED is the sensible choice here, and the ideal shape depends on the shade you fit over it.
Is a shade included?
No. The lamp is supplied without a shade so you can match one to your room, and the E27 lampholder accepts standard shade fittings. Choose one from our lamp shades.
How tall is it and how much floor space does it need?
It stands 1450mm high with a round base 250mm in diameter, so it needs very little floor to itself.
Can it be dimmed?
Yes, provided you fit a dimmable lamp and use it with a compatible dimmer.
How should the satin nickel be looked after?
Dust it with a dry, soft cloth. Avoid abrasive creams, metal polish and household sprays, which can mark the plated surface.
How much does it weigh?
Around 4.64kg, most of it in the base, which is what keeps the curved stem stable.