Description
The Creek Diamond is a 161mm square outdoor LED wall light with a white powder-coated aluminium frame shaped into a faceted diamond profile that projects 111mm from the wall. An integrated 15W LED module sits behind the frosted diffuser panel, delivering 1000 lumens through a 120° beam angle.
The CCT switch on the rear of the fitting allows the colour temperature to be changed between 2700K extra warm white, 3300K warm white, and 4000K cool white without needing separate bulbs or fittings. This makes the Creek Diamond adaptable to different seasons or uses: warmer tones for a welcoming entrance in winter evenings, cooler tones for visibility around side gates or bin stores. The IP65 rating means the fitting is fully weatherproof and suitable for any external wall position exposed to rain, dust and coastal salt spray.
The geometric diamond profile creates shadow patterns on the wall at dusk when the light is first switched on, turning the fitting into a visible architectural accent rather than just a functional bulkhead. The white finish works with rendered, painted timber, uPVC and brick facades in contemporary builds and is visually quiet enough to suit conservation areas where brighter metal finishes would clash. At 480g the fitting is light enough to mount on stud-framed cladding without additional backing.
The 111mm projection lets the faceted frame throw light back onto the wall as well as forward, giving the fitting depth after dark rather than a flat appearance. The three switchable colour temperatures cover extra warm, warm and cool white from a single unit, and the 120° beam angle spreads 1000 lumens across a broad section of wall or pathway.
Specification
| Colour Finish 1 |
White |
| Width |
161mm |
| Height |
161mm |
| Projection |
111mm |
| Number Of Bulbs |
1 |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
2700/3300/4000K Extra Warm/Warm/Cool White |
| Beam Angle |
120° |
| Lumen |
1000lm |
| Power Consumption |
15W |
| Voltage |
AC220-240V 50/60Hz |
| Dimmable |
No |
| IP Rating |
IP65 |
| Weight |
0.48KG |
| Warranty |
3 Year |
Frequently Asked
How is the colour temperature changed?
A small CCT switch is located on the rear of the fitting, accessible before final installation. Flick the switch to select 2700K, 3300K or 4000K. The choice is set during fitting and cannot be changed remotely once the light is mounted and wired.
Can it be used in coastal locations?
Yes. The IP65 rating and powder-coated aluminium construction make the Creek Diamond suitable for coastal exposure where salt spray and high humidity are present. Periodic rinsing with fresh water will help maintain the finish in severe marine environments.
Is the light dimmable?
No. The integrated LED driver does not support dimming. The light operates at full 1000lm output when switched on.
What beam pattern does it produce?
The 120° beam angle and frosted diffuser distribute light evenly across a wide area. The diamond profile also casts shadow patterns on the wall surface, particularly visible during dusk and dawn when ambient light is low.