Description
The Creek is a 268mm angled outdoor wall light with an integrated 20W LED delivering 1600 lumens through a white powder-coated aluminium housing. The angled profile directs light downward and outward at 120°, providing wide coverage across facades, patios, pathways and entrance areas. The light source is switchable between three colour temperatures — 2700K extra warm white, 3300K warm white, and 4000K cool white — via a switch on the fitting accessed before final installation.
Designed for outdoor use on rendered walls, brickwork and cladding, the Creek carries an IP65 rating protecting against dust ingress and low-pressure water jets from any direction. This makes it suitable for exposed coastal environments, north-facing walls receiving rain, and patio areas subject to hose wash-down. The 87mm projection from the wall gives the fitting physical presence without obstructing narrow walkways. The white finish pairs with contemporary render, white-painted timber cladding, and pale stone or concrete facades.
The aluminium body weighs 360g and fixes to standard exterior wall boxes or directly to solid substrates using the rear mounting plate. The angled geometry creates a shadow line on the wall during daylight, adding architectural detail even when the light is off. The 120° beam angle minimises harsh shadows beneath the fitting and provides even distribution across the illuminated area, reducing the number of fittings needed to light a given length of wall or pathway.
Specification
| Colour Finish 1 |
White |
| Width |
268mm |
| Height |
132mm |
| Projection |
87mm |
| Number Of Bulbs |
1 |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
2700/3300/4000K Extra Warm/Warm/Cool White |
| Beam Angle |
120° |
| Lumen |
1600lm |
| Power Consumption |
20W |
| Voltage |
AC220-240V 50/60Hz |
| Dimmable |
No |
| IP Rating |
IP65 |
| Weight |
0.36KG |
| Warranty |
3 Year |
Frequently Asked
How do I change the colour temperature?
The Creek has a CCT switch accessible on the fitting itself. Set the switch to 2700K, 3300K or 4000K before final installation. Once the fitting is wired and powered, the selected colour temperature is active. Changing it later requires removing the cover to access the switch.
Is it suitable for coastal installations?
Yes. The IP65 rating protects the internal components from salt spray, wind-driven rain and dust. The powder-coated aluminium resists corrosion better than bare steel or plastic housings. Regular rinsing with fresh water extends the finish life in coastal locations.
Can it be installed upside-down or sideways?
The fitting is designed for horizontal mounting with the angled face directing light downward. Installing it upside-down or sideways may compromise the IP65 rating by altering the drainage path for water that contacts the housing.
What's the spacing for pathway lighting?
The 1600lm output and 120° beam angle typically allow 3-4m spacing between fittings along a pathway or wall run. Closer spacing (2-3m) provides higher light levels for security or commercial applications; wider spacing (4-5m) suits ambient residential lighting.