Description
Two opal glass shades sit on a slim satin nickel arm, throwing light in both directions along the wall. The glass is a soft white that hides the lamp inside and keeps the glare low, while the satin finish stays quiet against pale paint. At 32cm across it reads as a pair rather than a single point of light, and the projection is shallow enough to sit in a walkway without catching a shoulder. Nothing about the shape shouts, which matters for a fitting that lives at eye level and gets looked at as much as looked by.
We reach for this where a single wall light would look mean: either side of a bed, above a dressing table, or in a hallway that needs light spread rather than pooled. It also earns its place in a sitting room that leans too heavily on one ceiling light, adding a lower and softer layer. It takes small E14 lamps, and golf ball shapes suit the shades best, up to 40W each. There is no switch on the body, so it runs from the wall switch, and fitting dimmable lamps lets you bring the level down late on.
Glass and metal throughout, light in the hand, and the satin nickel is easy to keep: a dry cloth over the metal, then a damp cloth and a dry one on the glass when it starts to look dull. Made for dry rooms indoors, away from splashes. It carries a one year warranty. The same pair of shades comes in antique brass if nickel is not your metal, and there is a single light version for narrower walls, plus matching ceiling lights in the range. Lamps are not included.
Specification
| Colour |
Satin Nickel |
| Ceiling Mountable |
Yes |
| Weight |
0.88KG |
| Width |
320mm |
| Height |
210mm |
| Projection |
160mm |
| Materials Used |
Iron, Glass |
| Adjustable Height |
No |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
2 x E14 40W max (lamps not included) |
| Lamp Cap |
E14 |
| Recommended Lamp |
LED (Golf Ball) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
Yes - Dimmable Lamps Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Opal White |
| Shade Material |
Glass |
| Shade Included |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Use white gloves provided when handling crystal and glass. (3) Ensure light is not illuminated when cleaning. (4) For best results when cleaning glass, remove from fitting first. |
| Country of Origin |
China |
Frequently Asked
What size is it?
It measures 320mm wide, 210mm high and stands 160mm off the wall, so it suits a corridor or a bedside position without crowding the space.
Which lamps should I use?
Two E14 lamps, up to 40W each. LED golf ball lamps are the ones we would choose, as the round shape sits well inside the opal glass.
Can I dim it?
Yes, provided you fit dimmable lamps and pair them with a compatible dimmer switch. There is no switch on the fitting itself.
What are the shades made of?
Opal white glass, with a satin nickel finish on the metalwork.
How do I clean the glass?
Switch off at the wall and let everything cool first. Dust the metal with a dry cloth, then wipe the glass with a barely damp cloth and dry it off. Avoid solvents and abrasive creams.
Is it suitable for a bathroom?
No. It is rated IP20, so keep it to dry rooms such as bedrooms, hallways and living rooms.