Description
Two shades of smoke glass sit against satin brass metalwork, so the light comes through gently tinted rather than bright and open. At 19cm wide it is a small fitting with a shallow projection, staying close to the wall and taking up very little room. Each shade holds a G9 capsule, and we would fit LED capsules here: they are small enough to sit discreetly inside the glass and cost little to run. The fitting is double insulated, and it will dim if you pair dimmable lamps with a suitable dimmer.
A pair either side of a bed is the obvious use, and this is one we suggest where a bedside table has no room for a lamp. It also works flanking a mirror in a dressing area, along a landing that needs light at low level, or in an alcove beside a chimney breast. There is no switch on the body, so it answers to the wall switch, which suits a bedroom pair controlled from the doorway. Keep it to rooms that stay dry; a bathroom needs a fitting rated for damp conditions.
The glass is the character here: a smoked tint over a soft brass tone that stays quiet against warm paint or timber. For cleaning, let the lamps go cold, then lift dust from the glass with a dry microfibre cloth, and use nothing stronger than a barely damp cloth on the brass, keeping polishes and sprays well away from the finish. It carries a one year warranty. We stock the same wall light in satin black and satin nickel, and the range runs on to a three light flush ceiling fitting if you want the ceiling to agree with the walls. Lamps are not supplied.
Specification
| Colour |
Satin Brass |
| Weight |
0.68KG |
| Width |
190mm |
| Height |
340mm |
| Projection |
140mm |
| Materials Used |
Iron, Glass |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
A |
| Lamp |
2 x G9 10W max (lamps not included) |
| Lamp Cap |
G9 |
| Recommended Lamp |
LED (Capsule G9) |
| Light Distribution |
Ambient |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Smoke |
| Base Dimensions |
D:100mm H:25mm |
| Cup Dimensions |
D:35mm H:17mm |
| Bracket Dimensions |
L:95mm W:20mm H:15mm |
| Glass Dimensions |
D:70mm H:75mm |
| Shade Material |
Glass |
| Shade Shape |
Cone |
| Shade Included |
Yes |
| Number of Shades |
2 |
| Pieces Included |
1 |
| Unassembled |
Yes-Glass To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Use white gloves provided when handling crystal and glass. (3) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamps does it take?
Two G9 capsules, up to 10W each. We would choose LED capsules, which stay cool enough in the hand and are compact enough to sit neatly within the smoke glass.
How far does it stand off the wall?
The projection is 140mm, with an overall height of 340mm and a width of 190mm, so it reads as a small fitting rather than a large one.
Can it be dimmed?
Yes, provided you fit dimmable G9 lamps and use a dimmer suited to them. No dimmer is supplied with the fitting.
Is there a switch on the fitting?
No, it is unswitched and is operated from the wall switch or whatever control the circuit already has.
How should the smoke glass be cleaned?
Turn the light off and let the lamps cool, then wipe the glass with a dry or barely damp microfibre cloth. Avoid abrasive creams and solvents, which can dull both the tint and the brass.
Is it suitable for a bathroom?
No. It is rated IP20, so it belongs in dry rooms such as bedrooms, hallways and living spaces.