Coniston 4 Light Ring Crystal Semi-Flush Ceiling Light - French Gold

The Coniston is a 950mm diameter crystal semi-flush ceiling light built on a circular French gold frame, with four E14 bulb positions set around the ring and hundreds of faceted crystal droplets layered across the outer and inner surfaces. Each crystal catches and refracts light from the bulbs, creating a diffused ambient glow that spreads across the ceiling and down into the room rather than concentrating in a single pool.

Designed for living rooms, dining rooms, main bedrooms and entrance halls with ceiling heights of 2.4m or higher, the Coniston sits 340mm below the ceiling when fitted, leaving adequate headroom while providing substantial decorative presence. The semi-flush mounting positions the crystals close enough to the ceiling to act as a distributed light source rather than a hanging feature, making the fitting suitable for rooms where a full-drop chandelier would be impractical. The French gold finish on the frame contrasts with the clear crystal, adding warmth to the overall tone of the light output.

The 24kg weight requires secure fixing to a ceiling joist or structural support — installers should check load capacity before fitting. The crystals are strung on a concealed internal framework, so the outer appearance is of continuous layered droplets around the ring perimeter. The four E14 bulb positions accept standard candle or golf ball LED bulbs up to 20W each (bulbs sold separately), and the fitting is dimmable when paired with compatible dimmable LED bulbs and a trailing-edge dimmer switch.

How many bulbs does the Coniston take?

The specification table lists 15 bulbs, but the title and imagery suggest a 4-light configuration. Please verify with us before purchase if this is critical to your installation — we can confirm the exact bulb count for this model.

Is it dimmable?

Yes, when fitted with dimmable E14 LED bulbs and connected to a compatible trailing-edge dimmer switch. Standard non-dimmable bulbs will work at full brightness but will not dim.

What ceiling height is needed?

The fitting projects 340mm below the ceiling. For comfortable headroom in a main living space, a ceiling height of 2.4m or higher is recommended. The 950mm diameter also requires adequate room width — the fitting works best in rooms of 4m × 4m or larger.

Can it be fitted to plasterboard ceilings?

At 24kg, the Coniston requires secure fixing to a ceiling joist or structural support. Plasterboard alone will not support this weight. An electrician should locate and fix to joists, or install a spreader plate across multiple joists before fitting.