Description
Square downlights read quieter in a ceiling than round ones, and this is a plain example: a matt white trim with crisp corners, a face a little over 9cm across, and a shallow body behind it. The lampholder is already fitted, so all it asks for is a GU10 lamp, and we would choose an LED reflector for the job. The cut-out is 80mm square. Dimming is open to you if you pick dimmable lamps and a dimmer switch to match them.
We stock these by the handful for kitchen ceilings, where the square face lines up neatly with tiles, cabinet runs and square switch plates. They work just as well down a hallway, over a landing or above a worktop, and the shallow trim keeps a low profile in a room with a lower ceiling. Lamps up to 50W are allowed, though an LED of a few watts will cover what most rooms need. Keep them to dry, covered rooms indoors; a shower zone or an outside soffit calls for something sealed instead.
The finish is a flat, low sheen white that settles quietly against a painted ceiling instead of catching the light. Upkeep is light: turn the power off, let the lamp lose its heat, then take a dry cloth to the trim to lift dust, and keep solvents and abrasive creams away from the paint. It carries a one year warranty. The same square shape is offered in matt black and matt silver if you would rather the trim showed, and the range also runs to round versions in white, black and silver. Lamps are not included.
Specification
| Colour |
Matt White |
| Ceiling Mountable |
Yes |
| Wall Mountable |
Yes |
| Weight |
0.10KG |
| Length |
92mm |
| Width |
92mm |
| Height |
40mm |
| Cut Out |
80x80mm |
| Materials Used |
Die-cast Aluminium |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
E |
| Lamp |
1 x GU10 50W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size hole does it need?
The cut-out is 80mm by 80mm square, with a visible face of 92mm by 92mm and a body depth of 40mm behind the trim.
Which lamp should I buy for it?
A GU10 LED reflector of 50mm diameter suits it best. The maximum rating is 50W, so almost any GU10 LED will sit comfortably within that.
Can I dim these?
Yes, provided you fit dimmable GU10 lamps and a dimmer switch that is compatible with them. No dimmer is supplied with the downlight.
Is it suitable for a bathroom?
No. Its protection rating is IP20, which is intended for dry rooms. Choose a rated fitting for bathroom zones and anywhere exposed to damp.
How do I keep the white trim looking clean?
Switch off first, let any lamp cool, then dust with a dry cloth. For kitchen grease, a barely damp cloth is enough; avoid solvents, bleach and cream cleaners on the painted surface.
Will it match the round Comfort downlights?
Yes, the same matt white paint is used across the range, so square and round trims can be mixed in one ceiling if you like the contrast.