Description
A small round downlight with a matt silver rim, 9.6cm across the face and shallow in build. The lampholder is already fitted, so it is ready to take a GU10 reflector lamp, and the body is double insulated. The trim itself is a plain circle with nothing decorative about it, which is usually the point: light where you want it and very little to look at during the day.
We use downlights like this where a room needs even light from above and nothing can hang down, so kitchens, hallways, landings and low-ceilinged bedrooms all suit it. The silver rim sits well against grey, timber and stainless steel, and it is a sensible pick if you want the fittings to read as hardware rather than decoration. Keep it to dry rooms, as it has no splash protection and bathroom zones are the wrong place for it. Dimming is possible, but only with dimmable lamps and a compatible dimmer; the fitting brings no control of its own.
It is sized for an 85mm cut-out and weighs very little, so the fitting is easy to handle. Give the rim an occasional wipe with a dry cloth once the lamp has cooled, and keep sprays, creams and solvents away from the matt silver, since anything abrasive will polish up patches of shine. It carries a one year warranty. We stock the same round shape in matt white and in matt black, and there is a square version in matt silver if you would rather have straight edges, which is handy when you are lighting a run of worktop and want the fittings to echo the joinery. Lamps are not included, and we would fit a warm white LED here.
Specification
| Colour |
Matt Silver |
| Ceiling Mountable |
Yes |
| Wall Mountable |
Yes |
| Weight |
0.10KG |
| Diameter |
96mm |
| Height |
40mm |
| Cut Out |
85mm |
| Materials Used |
Die-cast Aluminium |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
E |
| Lamp |
1 x GU10 50W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size hole does this need?
The cut-out is 85mm. The visible rim measures 96mm across, so it covers the opening with a small margin all round.
What lamp should I use?
A GU10 LED reflector lamp, up to 50W maximum. A 50mm reflector shape is the one to look for.
Can I dim it?
Yes, provided you fit dimmable GU10 lamps and use a dimmer suited to LED loads. No dimmer is supplied.
How deep is the fitting?
It stands 40mm tall in total, which makes it one of the shallower GU10 downlights we sell.
Is it suitable for a bathroom?
No. It is rated for dry indoor rooms only and should be kept out of bathroom zones and any area exposed to steam or splashing.
How do I clean the finish?
Dust it with a dry, soft cloth after the lamp has cooled. Avoid household cleaners and polishes, which can mark matt silver.