Description
The Clinvessa is a compact single ceiling spotlight in a clean white finish, made from steel and plastic. A round mounting plate fixes to the ceiling, and a short chrome-coloured swivel joint carries a white cylindrical head that you can angle where the light is needed. It is small: 6cm in diameter, 6.5cm long and 7.5cm high. The head takes a GU10 bulb of up to 5W, and the bulb is not included, which leaves you free to choose the bulb that suits the room. It is rated IP20, which means it is made for dry rooms indoors, so keep it away from bathrooms, showers and the outdoors.
Because the head swivels, this spotlight is good at putting light on one thing rather than across the whole room: a picture, a bookshelf, a dining table or a reading chair. It works well in kitchens, hallways, landings, living rooms and bedrooms, and the white finish sits quietly against a white ceiling, so the eye goes to what it lights rather than to the fitting. A few in a line along a corridor or over a kitchen worktop give neat, directed light, and a single one is an easy way to brighten a dark corner. It suits anyone who wants a simple, unfussy spotlight that does its job without drawing attention.
There is no switch on the spotlight itself; it is switched at the wall. It is a wired mains light running on 220-240V at 50/60Hz, so it should be installed by a qualified electrician. The installation instructions are available as a download. Packed, it weighs just 0.143KG. The white finish on the steel and plastic body runs from the mounting plate to the head, with only the swivel joint in a chrome tone. Before you buy a bulb, check that it is a GU10 rated at 5W or less.
Specification
| Length |
6.5cm |
| Height |
7.5cm |
| Diameter |
6cm |
| Body Material |
Steel, plastic |
| Body Colour |
White |
| Light Source |
GU10 (bulb not included) |
| Wattage |
Max 5W |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20 |
| Protection Class |
Class I |
| Voltage |
220-240V, 50/60Hz |
| Weight (packed) |
0.143KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can I use the Clinvessa spotlight in a bathroom?
No. It is rated IP20, which suits dry rooms indoors only, so it should be kept out of bathrooms, showers and outdoor spaces.
What bulb does this spotlight take?
It takes a GU10 bulb rated at up to 5W. The bulb is not included, so you will need to buy one separately.
Can the head of the spotlight be angled?
Yes. The head sits on a swivel joint, so you can turn it to point the light at a picture, a shelf or a worktop.
How big is the Clinvessa spotlight?
It is 6cm in diameter, 6.5cm long and 7.5cm high, a compact size that sits neatly on the ceiling.
Does it have its own on and off switch?
No. There is no switch on the spotlight itself, because it is designed to be switched at the wall.
Which materials form the body of the spotlight?
The body is made from steel and plastic in a white finish, with a chrome-coloured swivel joint between the plate and the head.