Description
The Clinvessa is a two light spotlight bar in a clean white finish, made from steel and plastic. A slim bar 30cm long, 4.5cm wide and 7.5cm high carries two spot heads on short chrome coloured stems, and each head angles on its own so you can point the light exactly where it is needed. It takes two GU10 bulbs at a maximum of 5W each. The bulbs are not included, which leaves you free to choose the shade of white light that suits the room. It is rated IP20, and that settles where it lives: indoors, in dry rooms only, so it is not one for a bathroom or for outdoors.
Two adjustable spots on one bar make this a practical answer wherever a single central light leaves corners in shadow. We like it in a hallway, where one head can wash a picture or a mirror while the other lights the passage. It suits a living room or bedroom too, where you can aim one spot at a reading chair and the other at a bookshelf, and it works well in a study over a desk. The white finish blends into a pale room, so the light does the work and the fitting stays quiet.
The body is steel and plastic, finished in white, with the chrome coloured stems adding a small touch of metal. There is no switch on the fitting itself: it is switched at the wall, so it runs from the ordinary light switch in the room. It works on 220-240V, 50/60Hz mains and, as a wired in light, it is installed by a qualified electrician. The installation instructions come as a download. When you buy bulbs, choose GU10 bulbs of 5W or less and pick a matching pair, so both spots give the same colour of light.
Specification
| Length |
30cm |
| Width |
4.5cm |
| Height |
7.5cm |
| Body Material |
Steel, plastic |
| Body Colour |
White |
| Light Source |
GU10 (bulb not included) |
| Wattage |
Max 2 x 5W |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20 |
| Protection Class |
Class I |
| Voltage |
220-240V, 50/60Hz |
| Weight (packed) |
0.33KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can I use this spotlight bar in a bathroom?
No. It is rated IP20, which means it is made for dry indoor rooms only, so it should not go in a bathroom, near water or outdoors.
Are bulbs included with the spotlight bar?
Bulbs are not included. It takes two GU10 bulbs at a maximum of 5W each, so you can choose the colour of light you prefer.
Can the spotlight heads be angled?
Yes. Each of the two heads sits on a short chrome coloured stem and can be pointed on its own, so you can light two different spots in the room.
How big is the Clinvessa spotlight bar?
It is 30cm long, 4.5cm wide and 7.5cm high, a compact size that suits hallways, bedrooms, studies and living rooms without crowding the space.
Does the spotlight bar have its own switch?
No, there is no switch on the fitting itself. It is switched at the wall, so it runs from the ordinary light switch in the room.
What colour is the finish?
The steel and plastic body is finished in white, with chrome coloured stems holding the two spot heads for a small touch of contrast.