Description
The Clermont outdoor lounging set pairs two lounge chairs with a matching round coffee table, all in putty, the same pale grey-beige on frame and cushion. Each chair has a slim steel frame, a laid-back seat and a quilted cushion, 9cm thick, that runs in one piece from the top of the backrest to the front edge of the seat. The chairs measure 75cm wide, 94cm deep and 78cm high, with a seat height of 48cm, and the table is 48cm wide and 40cm high.
It seats two, and it is made for sitting back with a morning coffee on a patio, a balcony or a quiet corner of the garden. Arranged with a chair either side of the table, the whole set takes up roughly 200 x 100cm. On a balcony, measure the depth as carefully as the width: each chair runs 94cm from front to back, and you will want room to stretch your legs out in front of it. The table top sits 8cm below the seat height, a handy level for setting down a cup, a book or a phone.
The frame is steel, powder coated with a protective finish designed to guard against corrosion and damage from the weather. The cushions are foam filled and covered in solution-dyed polyester. Solution-dyed means the colour goes into the polyester before the fibre is made, so it runs right through each strand. The method is widely used for outdoor fabric. Each cushion lies in a curved sling that hangs from the top of the frame. The set needs full assembly, and we suggest covering it whenever it is not in use to keep that fresh-out-of-the-box look. Putty is a quiet neutral that sits comfortably against weathered stone paving and green planting.
Specification
| Material |
Steel 70%, polyester 10%, foam 10%, Textilene 10% |
| Design |
Putty throughout; one-piece quilted cushions on sling seats; round coffee table |
| Construction |
Powder-coated steel frame; foam-filled cushions in solution-dyed polyester; maximum load 110kg per chair; full assembly required |
| Size |
Chair 75 x 94 x 78cm and table 48 x 48 x 40cm (width x depth x height); seat height 48cm; cushion 72 x 124cm, 9cm thick; overall area about 200 x 100cm |
| Weight |
Chairs 8.50kg each; table 3.00kg |
| Included |
Two lounge chairs with cushions; one coffee table |
| Product care |
Cover when not in use |
| Country of origin |
China |
Frequently Asked
How much space does the set need?
With the chairs either side of the table, you need an area of roughly 200 x 100cm. Each chair is 75cm wide and 94cm deep, so leave a little extra room in front for stretching out.
How high is the coffee table compared with the seats?
The round table is 40cm high and 48cm wide. With the chairs' seat height at 48cm, the table top sits just 8cm below the seat, right beside you for a cup or a book.
How thick are the cushions?
Each chair has a single quilted cushion, 72 x 124cm and 9cm thick, running from the top of the backrest down to the front of the seat. It is foam filled and covered in solution-dyed polyester.
How do I protect the set when it is not in use?
We suggest a cover whenever the set is not in use, which helps keep it looking fresh. The steel frame is powder coated with a protective finish designed to guard against corrosion and weather damage.
Does the set need assembling?
Yes. The set needs full assembly, so allow some time to put the chairs and table together before you first sit down.
How much weight will each chair take?
Each chair is rated to a maximum load of 110kg. The chairs weigh 8.50kg each and the table 3.00kg, useful to know if you like to move furniture around the garden to follow the sun.