Description
Five E27 lampholders sit on an open black frame, ranged across a span of 47cm so the light falls wide rather than pooling tightly. The look is rustic and stripped back: dark metalwork, bare holders and plenty of air between them. Projection from the wall is modest, and the black finish reads as a clean outline against a pale wall.
We reach for something like this in a hallway or on a landing, where a lone fitting would look mean and a row of separate lights would be fussy. It also works either side of a bed or above a long sideboard in a dining room. Spread across the frame, low wattage lamps give a soft wash rather than a hard point of light, which suits rooms used in the evening more than rooms worked in. Tubular LED lamps suit it best, since their shape follows the line of the holders and keeps the whole thing looking deliberate. Dimming is possible with dimmable lamps and a compatible dimmer. There is no switch on the fitting, so it takes its cue from the wall switch.
Everything wears the same black finish, frame and holders alike, so the fitting stays quiet on the wall when the lamps are off. For upkeep, run a dry cloth along the arms every so often to lift dust before it settles into the finish, and let the lamps go cold before you handle them. It carries a one year warranty. The range also runs to a pendant and a table lamp in the same black, so the look can be carried across a room or a floor of the house. Lamps are not included.
Specification
| Colour |
Black |
| Ceiling Mountable |
Yes |
| Weight |
1.30KG |
| Diameter |
470mm |
| Height |
510mm |
| Projection |
230mm |
| Materials Used |
Iron |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
5 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (Tubular T45) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamps does it take, and how many?
It takes five E27 lamps, each up to 20W. We would choose tubular T45 LED lamps, which follow the shape of the holders neatly.
Can it be dimmed?
Yes, provided you fit dimmable lamps and pair them with a dimmer that suits them. As supplied it has no switch of its own.
How much space does it need on the wall?
Allow for a 47cm span and a height of 51cm, with the frame standing 23cm out from the wall.
Is it suitable for a bathroom?
No. It is rated IP20, so keep it to dry rooms such as halls, landings, bedrooms and dining rooms.
How should the black finish be cleaned?
Dust it with a dry cloth. Avoid wet cloths and household sprays on the metalwork, and make sure the lamps have cooled first.
Are there other pieces in the same range?
Yes, a 47cm pendant and a 64cm table lamp, both five light and both in black.