Description
The Cesmine pendant light is a rise-and-fall ceiling light built from three stacked shades: two wide, flat discs and a deeper dome that hangs beneath them. The shades are steel, black on their upper faces with copper-coloured undersides, so the copper glows warmly once the bulb is lit. It measures 110cm tall overall and 43cm across. It takes an E27 bulb of up to 60W, and the bulb is not included, so you can choose the colour of light you like best. It is rated IP20, which settles where it belongs: indoors, in a dry room.
Hung over a dining table or a kitchen island, the layered shades send light down onto the surface while the copper-coloured undersides add a warm tone to the room. Because the height adjusts by hand, you can pull it low for meals and push it back up when you need the space clear, which suits rooms that do more than one job. It also works well in a living room, a hallway with good ceiling height or a home office. The mix of black and copper sits comfortably with wood, grey and white schemes alike.
The body pairs plastic and steel, and the shades are steel throughout, with slim copper-coloured struts holding the layers apart. There is no switch on the light itself, so it is switched at the wall, and it runs on 220-240V, 50/60Hz mains. As a wired-in light it is installed by a qualified electrician, and the installation instructions come as a PDF download. Packed, it weighs 2.314KG. Choose an E27 bulb of 60W or less and it is ready the moment it is fitted.
Specification
| Overall Height |
110cm |
| Diameter |
43cm |
| Body Material |
Plastic, steel |
| Body Colour |
Black |
| Shade Material |
Steel |
| Shade Colour |
Black, copper |
| Light Source |
E27 (bulb not included) |
| Wattage |
Max 60W |
| Features |
Height-adjustable manually |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20 |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Weight (packed) |
2.314KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Which rooms suit the Cesmine pendant light?
It is rated IP20, so it belongs indoors in a dry room such as a dining room, kitchen, living room or home office.
Can I adjust the hanging height?
Yes. The height adjusts by hand, so you can lower it over a table for meals and raise it again when you want more headroom.
Which bulb does it need?
It takes an E27 bulb of up to 60W. The bulb is not included, so you can choose the brightness and colour of light that suits your room.
How big is the pendant?
It measures 110cm tall overall and 43cm across, a size that sits well over a dining table or a kitchen island.
What colour is the finish?
The body is black and the steel shades are black with copper-coloured undersides, so the copper shows as a warm tone once the bulb is lit.
Does it have its own switch?
No. There is no switch on the light itself, so it is switched at the wall, and it runs on 220-240V, 50/60Hz mains.