Description
This is a round recessed downlight with a matt white trim and an integrated LED, spreading light widely across a room rather than throwing a tight pool beneath it. It draws 24W and gives 2160 lumens at a warm 3000K, a tone that reads soft and slightly golden against white paint and pale timber. The driver is supplied with it, and the fitting is switched rather than dimmed, so output stays at one steady level. There is no lamp to change.
We reach for a broad round downlight like this where a ceiling would otherwise need a crowd of small ones: kitchens, hallways, landings and open-plan corners all take it well, and a few spaced across a room give flat, workable light without harsh hotspots. The warm tone makes it comfortable in living rooms and bedrooms too. It is one we suggest when a room needs even light from above and a pendant would only be in the way. Keep it to dry rooms indoors, as a shower area or an open porch wants a sealed fitting instead.
The face is finished in a low-sheen white that sits quietly against a plastered ceiling and stays discreet when the light is off, and the body is shallow for its width. For cleaning, isolate the circuit, allow the fitting to cool, then draw a dry microfibre cloth over the trim and the lit face; solvents and cream cleaners will dull the white, so leave them in the cupboard. It carries a three year warranty. The same round shape runs through the range in narrower and wider sizes, all sharing this matt white trim, and there is a cooler white version if you would rather the light read crisp than warm.
Specification
| Colour |
Matt White |
| Ceiling Mountable |
Yes |
| Recessable |
Yes |
| Weight |
0.51KG |
| Diameter |
225mm |
| Height |
60mm |
| Cut Out |
210mm |
| Materials Used |
Die-cast Aluminium |
| Energy Class |
F |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
F |
| Min Energy Class |
F |
| Lamp |
1 x 24W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
25000hrs |
| LED Brand |
Epistar |
| Qty of SMD |
120 |
| SMD Chipset |
2835 |
| LED Power |
0.2W (±5%) |
| Type of LED |
SMD |
| Lumens per Watt (lm/W) |
90lm/W (±5%) |
| Beam Angle |
130° |
| System Flux |
2160lm (±5%) |
| CRI |
=80 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Type of Driver |
Constant Current |
| Casing Material |
Aluminium |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
24W (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
25000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size opening does it need?
It is made for a 210mm cut-out, with an outer diameter of 225mm, so the trim overlaps the edge of the aperture by a few millimetres all round.
How deep is the fitting?
The body stands 60mm tall, which is shallow for a downlight of this diameter.
Can I put it on a dimmer?
No. It is a non-dimmable fitting and should be run on a plain switched circuit at its full 2160 lumens.
What colour of light does it give?
A warm white at 3000K, the softer end of white light, closer to a traditional incandescent tone than to daylight.
Is a driver included?
Yes, the LED driver is supplied with the downlight.
How long should the LED last?
It is rated at around 25,000 hours of use, and the fitting carries a three year warranty.