Description
A plain round downlight with a matt white face and the LED built in, putting out 1080 lumens from 12W at 3000K. The warm white tone reads soft and gently yellow, closer to a table lamp than to daylight, and the spread is broad rather than narrow, so light lands evenly across a floor instead of pooling in bright spots. A driver is supplied with it. There is no dimming, so it works at full output whenever the circuit is live, which makes it a good match for a plain switch or a sensor.
This is the middle size, and we use it where a room wants several even lights rather than one fitting in the centre: kitchen ceilings, hallways, landings, bedrooms and a home office. The warm tone flatters timber, painted walls and worktops in the evening, so it suits a living space as readily as a working one. Keep it to dry rooms indoors, though. A shower zone, a utility ceiling above a sink or a covered porch asks for a sealed fitting, and this is not one.
The visible rim is finished matt white, which disappears against a white ceiling and keeps the eye on the light rather than the fitting. It is double insulated. For cleaning, switch the circuit off first, then run a dry cloth around the rim to lift dust, and leave damp cloths and sprays away from the lens. The LED is integral, so there are no lamps to buy or swap out. It carries a three year warranty. The range runs from small rounds up to a wide one, and this size is also made in a cooler white if you want a crisper light over a worktop.
Specification
| Colour |
Matt White |
| Ceiling Mountable |
Yes |
| Recessable |
Yes |
| Weight |
0.26KG |
| Diameter |
144mm |
| Height |
55mm |
| Cut Out |
132mm |
| Materials Used |
Die-cast Aluminium |
| Energy Class |
F |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
F |
| Min Energy Class |
F |
| Lamp |
1 x 12W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
25000hrs |
| LED Brand |
Epistar |
| Qty of SMD |
60 |
| SMD Chipset |
2835 |
| LED Power |
0.2W (±5%) |
| Type of LED |
SMD |
| Lumens per Watt (lm/W) |
90lm/W (±5%) |
| Beam Angle |
130° |
| System Flux |
1080lm (±5%) |
| CRI |
=80 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Type of Driver |
Constant Current |
| Casing Material |
Aluminium |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
12W (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
25000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How big is the fitting?
The face measures 144mm across and the body is 55mm deep, with a 132mm cut-out.
Can I put it on a dimmer?
No. This version is non-dimmable and should be run from standard switching only.
Does the LED need replacing at some point?
The LED is integrated and rated at an average life of 25,000 hours, so there is nothing to change during normal use.
How warm is the light?
It is 3000K warm white, a soft domestic tone rather than the cooler, bluer 4000K also made in this range.
Is it suitable for a bathroom?
It is rated IP20, so it belongs in dry rooms. Choose a sealed, higher rated fitting for zones near a bath or shower.
What sort of coverage does one give?
The beam is a wide 130 degrees, which is why it works well in groups across a ceiling for general light rather than as a narrow accent.