Brillia 3m 3-Phase Track Light Rail Trimless Surface Mounted 1-10V Dimmable - White

The Brillia is a 3m three-phase track lighting rail designed for surface mounting, with a trimless white profile that sits 35mm from the ceiling. The three-phase wiring system allows up to three separate circuits of track-mounted spotlights to be controlled independently on a single rail, giving flexibility to zone lighting or create different scenes within the same track run.

Designed for retail spaces, galleries, open-plan offices and residential kitchens needing adaptable accent or task lighting, the Brillia accepts any three-phase track spotlight with compatible adaptor heads. The 1-10V dimming protocol integrates with compatible dimmers to adjust light levels across each circuit independently, allowing one circuit to provide background wash while another highlights specific zones. The 3m length suits long wall runs, kitchen islands and display zones up to 3m wide, and multiple tracks can be joined end-to-end using linking connectors to cover longer distances.

The trimless profile means the track sits flush against the ceiling surface with minimal visual break, presenting a cleaner line than traditional bulkier track systems. The white finish blends into white or light-coloured ceilings, making the track less visually dominant when spotlights are not fitted. The IP20 rating limits use to dry indoor environments — the Brillia is not suitable for bathrooms, outdoor installations or any location where moisture is present.

What does three-phase mean for track lighting?

Three-phase track contains three separate electrical circuits running the length of the rail. This allows you to control up to three groups of spotlights independently — for example, one circuit for wall wash, one for task lighting and one for accent lighting. Each circuit can be dimmed or switched separately, giving greater control than single-circuit track.

What spotlights are compatible with this track?

The Brillia accepts any three-phase track spotlight with a compatible adaptor head. Most manufacturers produce adaptors for standard three-phase systems. Check that the spotlight you intend to use specifies three-phase track compatibility before purchasing.

How is 1-10V dimming controlled?

1-10V dimming requires a compatible dimmer module or control system that sends a 1-10V signal to the track. This is typically a wall-mounted dimmer or a building management system. Standard domestic trailing-edge or leading-edge dimmers are not compatible with 1-10V systems.

Can multiple tracks be joined together?

Yes. Ideal Lux supplies linking connectors that join multiple 3m sections end-to-end to cover longer runs. The connectors maintain the three-phase wiring across the join, allowing a continuous circuit across multiple track sections.