Description
A small surface spot for the wall, matt white with black detail, built around an integrated 7W LED. It gives a narrow, directed beam rather than a broad wash, in a crisp cool white at 4000K that keeps edges sharp and colours honest. The driver sits inside the housing, so it wires straight to a supply and there is no lamp to source or change. It is not dimmable, and there is no switch on the body, so control comes from the wall.
We use spots like this where a table lamp would only get in the way: beside a bed for reading, above a worktop, at the turn of a stairwell, or in pairs down a hallway to pick out pictures and shelving. Output is 560 lumens from a single head, which pools light neatly on a book or a work surface without flooding the room. The cool tone suits kitchens, utility rooms, studies and workshops, anywhere you want light that reads as daylight rather than candlelight.
The housing is a compact block, painted matt so it stays quiet on the wall and does not bounce highlights back at you. It is double insulated, and rated for dry interior rooms only, so keep it clear of showers, sinks and anything open to the weather. Cleaning takes a moment: turn the power off, let the fitting lose its heat, then lift dust from the face with a soft dry cloth, using nothing stronger than a damp cloth on the paint. It carries a three year warranty. We stock the same fitting in a warm white, and in a wider version carrying an extra head if you want more light from one point.
Specification
| Colour |
Matt White |
| Second Colour |
Black |
| Weight |
0.66KG |
| Length |
120mm |
| Width |
113mm |
| Height |
126mm |
| Materials Used |
Aluminium, Iron |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 7W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
4000K Cool White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
25000hrs |
| LED Brand |
CREE |
| SMD Chipset |
CXA1304 |
| LED Power |
7W (±5%) |
| Type of LED |
COB |
| Lumens per Watt (lm/W) |
80lm/W (±5%) |
| Beam Angle |
35° |
| System Flux |
560lm (±5%) |
| CRI |
=80 |
| Light Distribution |
Multiple Directions |
| Driver Included |
Yes |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
7W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
25000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How big is it on the wall?
It measures 120mm long by 113mm wide and 126mm high, so roughly 11cm in each direction. It weighs 0.657kg.
Can I dim it?
No. The LED is non-dimmable, so it should be run from a standard on/off switch rather than a dimmer or trailing edge module.
What sort of light does it give?
A single 7W integrated LED producing 560 lumens at 4000K, a cool white, with a tight 35 degree beam and a colour rendering index of 80.
Is there a lamp to buy or replace later?
No. The LED and its driver are built in, with an average rated life of 25,000 hours, so nothing needs fitting on arrival.
Can it go in a bathroom or outside?
It is IP20 rated, which means dry indoor rooms only. Keep it away from shower zones, basins and any exposed position.
How should I clean the matt finish?
Switch off at the wall, let the fitting cool, then dust the painted surfaces with a soft dry cloth. A slightly damp cloth is fine for marks; avoid solvents and abrasive creams.