Description
Small, plain and quietly effective, this is a compact spot with a single integrated LED and its driver built in. The light comes out warm rather than crisp, in a fairly tight cone, so it marks out whatever it is aimed at instead of filling the room behind it. At 7W it asks very little of a circuit and gives around 500 lumens, which is the right order of brightness for a picture, a shelf of books or the corner of a reading chair. The body is matt white with black, reading as neat hardware rather than as decoration.
We would use it on its own or repeated along a wall: either side of a bed, down a hallway, tucked into an alcove, or above a run of worktop where a pendant would hang in the way. There is no switch on the fitting itself and it is not dimmable, so it wants a wall switch or a lighting circuit it can sit on. The warm tone suits bedrooms, sitting rooms and landings, and it flatters timber, brick and painted plaster far better than a colder white would. Keep it to dry rooms indoors.
The housing is a solid little block, double insulated, and the matt surface is the part worth looking after: let it cool, then take the dust off with a dry cloth, and keep sprays and scouring pads away, since they dull a matt finish faster than dust ever does. It carries a three year warranty. We also stock the same spot in a cooler, more neutral white, and in a twin version if you want light thrown in two directions from one point on the wall. It is a fitting we reach for when a room needs light aimed at something in particular rather than spread everywhere.
Specification
| Colour |
Matt White |
| Second Colour |
Black |
| Weight |
0.66KG |
| Length |
120mm |
| Width |
113mm |
| Height |
126mm |
| Materials Used |
Aluminium, Iron |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 7W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
25000hrs |
| LED Brand |
CREE |
| SMD Chipset |
CXA1304 |
| LED Power |
7W (±5%) |
| Type of LED |
COB |
| Lumens per Watt (lm/W) |
71lm/W (±5%) |
| Beam Angle |
35° |
| System Flux |
500lm (±5%) |
| CRI |
=80 |
| Light Distribution |
Multiple Directions |
| Driver Included |
Yes |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
7W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
25000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How bright is it, and what colour is the light?
It gives around 500 lumens at 3000K, a warm white that sits comfortably in bedrooms, hallways and sitting rooms.
How big is it on the wall?
It measures roughly 120mm long by 113mm wide and stands about 126mm out, so it takes up very little visual space.
Can I dim it?
No. It is a non-dimmable fitting and should be run on a plain switched circuit rather than a dimmer.
Do I need to buy a lamp for it?
No. The LED is integrated and the driver is built in, so the fitting arrives complete.
Is it suitable for a bathroom or an outside wall?
It is rated for dry indoor rooms only, so keep it away from splash zones and anywhere exposed to weather.
How long should the LED last?
The LED is rated at 25,000 hours of average life, and the fitting carries a three year warranty.