Free Delivery on all orders over £99*

Blazewood 100W 24V Constant Voltage LED Driver - IP67 Rated

£23299
The RRP is the manufacturer's recommended retail price of the item.
Available to Order - Contact us for current stock and delivery times
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Blazewood is a 100W constant voltage LED driver designed to power 24V LED strip lighting, tape lights and low-voltage LED systems. The driver converts mains AC to a stable 24V DC output, maintaining consistent voltage to prevent LED flicker and colour shift across the run length. An IP67-rated metal housing seals the internal circuitry against water ingress and dust, making the driver suitable for outdoor installation, wet locations and bathroom zones where condensation is present.

Designed for architectural lighting, landscape lighting, under-cabinet runs and outdoor façade installations, the Blazewood fits into ceiling voids, recessed troughs, or outdoor junction boxes where the driver can be concealed from view. The 220mm x 68mm footprint is compact enough for tight installation spaces while still delivering 100W of continuous output. The IP67 rating means the driver can be mounted directly onto exterior walls, embedded in outdoor decking, or installed in garden lighting schemes without additional waterproof enclosures.

The metal housing acts as a heat sink to dissipate the thermal load from the internal transformer and rectifier circuitry, allowing the driver to operate continuously at full 100W output without thermal cutout. The driver is non-dimmable, so it pairs best with LED systems where constant brightness is needed rather than scenes or mood control. Input is standard 230V AC mains via hardwired connection (no plug fitted), and output terminals accept standard low-voltage cable for connection to LED strips or tape.

The Blazewood carries a 5-year warranty from Ideal Lux and meets the necessary safety certifications for mains-to-low-voltage conversion in UK installations. The constant voltage design means it can power multiple parallel runs of 24V LED strip from a single driver, up to the 100W total load limit.

Specification
Length (mm) 220
Projection (mm) 68
Dimmable No
IP Rating IP67
Warranty 5 Years
Frequently Asked

What does constant voltage mean?

Constant voltage drivers maintain a fixed output voltage (in this case 24V DC) regardless of the LED load connected, up to the maximum 100W capacity. This differs from constant current drivers which vary voltage to maintain fixed current. Constant voltage is the standard for LED strip and tape lighting.

Can this driver be used outdoors?

Yes. The IP67 rating means the driver is fully sealed against dust and protected against temporary water immersion up to 1 metre depth. It can be installed in outdoor locations, wet zones, and areas exposed to rain or condensation without additional waterproof housing.

Is it dimmable?

No. The Blazewood is a non-dimmable driver designed for constant-brightness installations. If dimming is needed, a separate PWM dimmer can be installed on the low-voltage output side between the driver and the LED strip, but the driver itself does not accept dimmer input on the mains side.

What length of LED strip can it power?

The maximum load is 100W total. For typical 24V LED strip rated at 14.4W per metre, the driver can power approximately 6-7 metres of continuous strip. Higher-power LED strip (e.g. 20W/m) will reduce the maximum run length accordingly. Check the wattage per metre of your specific LED strip and divide 100W by that figure.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Blazewood is a 100W constant voltage LED driver designed to power 24V LED strip lighting, tape lights and low-voltage LED systems. The driver converts mains AC to a stable 24V DC output, maintaining consistent voltage to prevent LED flicker and colour shift across the run length. An IP67-rated metal housing seals the internal circuitry against water ingress and dust, making the driver suitable for outdoor installation, wet locations and bathroom zones where condensation is present.

    Designed for architectural lighting, landscape lighting, under-cabinet runs and outdoor façade installations, the Blazewood fits into ceiling voids, recessed troughs, or outdoor junction boxes where the driver can be concealed from view. The 220mm x 68mm footprint is compact enough for tight installation spaces while still delivering 100W of continuous output. The IP67 rating means the driver can be mounted directly onto exterior walls, embedded in outdoor decking, or installed in garden lighting schemes without additional waterproof enclosures.

    The metal housing acts as a heat sink to dissipate the thermal load from the internal transformer and rectifier circuitry, allowing the driver to operate continuously at full 100W output without thermal cutout. The driver is non-dimmable, so it pairs best with LED systems where constant brightness is needed rather than scenes or mood control. Input is standard 230V AC mains via hardwired connection (no plug fitted), and output terminals accept standard low-voltage cable for connection to LED strips or tape.

    The Blazewood carries a 5-year warranty from Ideal Lux and meets the necessary safety certifications for mains-to-low-voltage conversion in UK installations. The constant voltage design means it can power multiple parallel runs of 24V LED strip from a single driver, up to the 100W total load limit.

    Specification
    Length (mm) 220
    Projection (mm) 68
    Dimmable No
    IP Rating IP67
    Warranty 5 Years
    Frequently Asked

    What does constant voltage mean?

    Constant voltage drivers maintain a fixed output voltage (in this case 24V DC) regardless of the LED load connected, up to the maximum 100W capacity. This differs from constant current drivers which vary voltage to maintain fixed current. Constant voltage is the standard for LED strip and tape lighting.

    Can this driver be used outdoors?

    Yes. The IP67 rating means the driver is fully sealed against dust and protected against temporary water immersion up to 1 metre depth. It can be installed in outdoor locations, wet zones, and areas exposed to rain or condensation without additional waterproof housing.

    Is it dimmable?

    No. The Blazewood is a non-dimmable driver designed for constant-brightness installations. If dimming is needed, a separate PWM dimmer can be installed on the low-voltage output side between the driver and the LED strip, but the driver itself does not accept dimmer input on the mains side.

    What length of LED strip can it power?

    The maximum load is 100W total. For typical 24V LED strip rated at 14.4W per metre, the driver can power approximately 6-7 metres of continuous strip. Higher-power LED strip (e.g. 20W/m) will reduce the maximum run length accordingly. Check the wattage per metre of your specific LED strip and divide 100W by that figure.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.