Description
A very small square recessed downlight, finished in white, with the LED built in and its driver supplied. The trim reads as little more than a neat white square in the ceiling, and the beam is narrow and focused, putting light exactly where you aim it rather than spreading it about the room. Colour is a warm 3000K, and output is modest by design: this is accent light rather than the main light for a room. It is not dimmable, so it works best on a plain switch.
We reach for these where a full size downlight would look heavy: picking out a picture, lighting the underside of fitted joinery, marking the edge of a step in a hallway, or dotting light along a dressing area. The 40mm square cut-out all but disappears into a soffit or a shelf front, which is why kitchen and cabinet fitters keep coming back to them. At 3W each they ask very little of a circuit, so a line of them can share the same switch. They belong in dry indoor rooms, hallways, sitting rooms, bedrooms and studies, and not in a shower area or outdoors.
The finish is a smooth flat white that sits quietly against a painted ceiling, and the fitting is double insulated, with the driver included in the box. To clean, switch off, let it go cold, then work a dry brush or soft cloth around the trim to lift dust; keep water and solvents away from the lens. It carries a three year warranty. The LED is integral, so there is no lamp to change. We stock the same square trim in black as well as white, and the range runs on into longer bars carrying several of these downlights in a line, should you want a continuous run rather than isolated pools of light.
Specification
| Colour |
White |
| Weight |
0.13KG |
| Length |
45mm |
| Width |
45mm |
| Height |
42mm |
| Cut Out |
L:40mm x W:40mm |
| Materials Used |
Aluminium |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Lamp |
3W integrated LED (no lamps to fit) |
| Lamps Included |
Yes - Integrated |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| LED Power |
3W (±5%) |
| Lumens per Watt (lm/W) |
55lm/W (±5%) |
| Beam Angle |
15° |
| System Flux |
165lm (±5%) |
| CRI |
>90 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
3W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size hole does it need?
The cut-out is a 40mm square. The visible body measures 45mm by 45mm, with a depth of 42mm behind the trim.
How much light does it give?
165 lumens at 3W, in a warm white 3000K with a tight beam. That is an accent level of light, so plan several along a run if you want an even wash.
Can it be dimmed?
No. It is a non-dimmable fitting, so pair it with a standard on and off switch.
Does it come with a driver?
Yes, the driver is supplied with the fitting, and the LED is integrated rather than a replaceable lamp.
Is it suitable for a bathroom?
It is rated IP20, which keeps it to dry indoor spaces. Choose a fitting with a higher rating for zones near a bath or shower.
How long should the LED last?
It is rated at 30,000 hours average life, with a colour rendering figure above 90 for accurate colours on artwork and finishes.