Description
Small enough to go almost unnoticed, this is one of the neatest recessed downlights we stock. The aperture is a square of just 40mm, with a black trim that reads as a dark point rather than a bright ring, and the integral LED behind it gives a tight, well controlled beam of warm white light. At 3W it makes no attempt to light a whole room. Think of it instead as a precise tool for picking out something specific: a picture, the edge of a shelf, a run of worktop, a change of level in a hallway.
We use fittings like this where a ceiling needs light without a row of full size downlights across it. In a corridor, along a landing, above a display niche or set in a line over an island, several of them punctuate a room rather than wash it. The output is modest, around 165 lumens, so plan them as accent light alongside a pendant or lamps rather than as the main source. The warm tone flatters wood, brass and deep paint colours. It is not dimmable, so give it its own switch.
The trim and body are finished in black, and the driver comes in the box, so nothing else needs sourcing. Keep it to dry rooms indoors; anywhere exposed to steam or weather wants a sealed fitting instead. Dust is the only real upkeep: switch off the power, wipe the visible face with a dry cloth, and leave the lens alone otherwise. It carries a three year warranty. The same fitting is offered in white, and the range runs on into longer bars holding more lights, so this can be matched with a longer strip nearby.
Specification
| Colour |
Black |
| Weight |
0.13KG |
| Length |
45mm |
| Width |
45mm |
| Height |
42mm |
| Cut Out |
L:40mm x W:40mm |
| Materials Used |
Aluminium |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Lamp |
3W integrated LED (no lamps to fit) |
| Lamps Included |
Yes - Integrated |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| LED Power |
3W (±5%) |
| Lumens per Watt (lm/W) |
55lm/W (±5%) |
| Beam Angle |
15° |
| System Flux |
165lm (±5%) |
| CRI |
>90 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
3W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size is the cut-out?
The cut-out is a 40mm x 40mm square. The fitting itself measures 45mm x 45mm across the face and 42mm in depth.
Can it be dimmed?
No. This one is non-dimmable, so it is best given its own switch and paired with dimmable lighting elsewhere in the room if you want to vary the mood.
Do I need to buy a driver separately?
No, the driver is supplied with the fitting.
How bright is it, and what colour is the light?
It gives around 165 lumens at 3000K, a warm white close to the tone of a traditional bulb, with a narrow beam that concentrates the light rather than spreading it.
Is the LED replaceable?
No, the LED is integral to the fitting rather than a separate lamp, so there is nothing to change. It carries a three year warranty.
Can I use it in a bathroom?
It is rated IP20, so keep it to dry rooms. Bathroom zones and any position open to weather need a sealed fitting with a suitable rating.