Description
The Beno ECO is a round LED ceiling light drawing 20W and putting out up to 2000 lumens through a wide 110 degree spread, so the light falls evenly rather than pooling beneath the fitting. White light is selectable across three tones, switching between 3000K warm white, 4000K neutral white and 6500K cool white to suit the room and the time of day. Across the pond this format is the flush mount ceiling light, sitting tight to the surface with no drop or pendant. At 200mm across and just 55mm deep, it keeps a low, unobtrusive profile on the ceiling.
Its IP65 rating opens up far more than a standard indoor ceiling light, making it a sensible choice for covered porches, soffits, utility rooms, garages, bathrooms and any space exposed to moisture or splashing. At general lighting levels it covers around 6 to 7 m², which suits an entrance area, a small bathroom or a porch where you want clean, shadow-free illumination. The wide 110 degree beam helps it work well on lower ceilings, where a tighter cone would leave the edges of the room dim. Several units spaced along a run will light a longer hallway or a sheltered walkway.
The body is moulded polycarbonate in a white finish, a tough plastic that copes with damp and outdoor temperatures better than many alternatives. The IP65 sealing keeps out dust and water jets, and the integrated LED is rated for 30,000 hours, so there is no bulb to replace over its working life. It mounts directly to a wall or ceiling and is not dimmable, running straight from a 220 to 240V AC mains supply with no separate driver to specify. The Beno ECO range includes further sizes and outputs for matching fittings across a property.
Specification
| Power |
20W |
| Voltage |
220-240 AC |
| Luminous flux |
1850 (WW) / 2000 (NW) / 1900 (CW) lm |
| Colour temperature |
3000/4000/6500K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
110° |
| IP rating |
IP65 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted |
| Lifespan |
30,000 hours |
| Shape |
Round |
| Dimensions |
Ø200 × 55 mm |
| Weight |
354 g |
| Material |
Pp |
| Finish |
White |
Downloads
Frequently Asked
Can the Beno ECO be used outside?
Yes. It carries an IP65 rating, which means it is fully protected against dust and resistant to water jets, so it is suitable for exposed outdoor and wet locations such as porches, soffits and sheltered walkways. It is equally at home in damp indoor spaces like bathrooms, garages and utility rooms.
How large a room will it light?
With up to 2000 lumens and a wide 110 degree beam, it covers around 6 to 7 m² at general lighting levels. That suits an entrance, a small bathroom or a porch. For larger or longer areas, space several units along the run for even coverage.
How do I change the colour temperature?
The Beno ECO is colour selectable across 3000K warm white, 4000K neutral white and 6500K cool white. The tone is set on the fitting during installation, letting you match a cosy warm light to a living space or a crisp cool light to a utility area or bathroom.
How do I clean it?
Wipe the white polycarbonate body with a soft, slightly damp cloth and a mild detergent, then dry it off. Avoid abrasive pads or solvents, which can mark the surface. As it is IP65 sealed, occasional cleaning keeps the output bright without risk to the internals.