Description
The Beno Eco is a round LED ceiling and wall light drawing 20W and pushing out up to 1600 lumens through a wide 110° spread that washes a space evenly rather than spotlighting it. Three colour temperatures are switchable on the fitting, running 3000K warm white, 4000K neutral white and 6500K cool daylight white, so the tone can be matched to the setting. Across the Atlantic a fitting like this sits in the flush mount LED ceiling light category, where its low 55mm depth and Ø200 round body keep it close to the surface. The LED array is integrated, so there is no bulb to source or swap.
Measuring 200mm across, the Beno Eco covers around 5 m² at general lighting levels, which makes it a sensible choice for a porch, a covered entrance, a utility area, a small bathroom or a compact hallway where one even pool of light is enough. Because it carries an IP65 rating it can take exposed outdoor positions and wet locations, so it works equally well on a sheltered external wall as on an interior ceiling. The wide beam and modest output suit lower ceiling heights, where a tighter beam would leave dark corners. Picking the warm setting softens an entrance, while the cool setting reads cleaner for a wash room or workspace.
Construction is moulded polypropylene in a black finish, with the IP65 sealing that lets it handle direct weather and damp. It runs on 220-240V AC mains and the integrated driver is built in, so wiring is direct with no separate transformer to specify. Mounting is to a wall or ceiling surface, and the fitting is not dimmable, holding a steady output on each colour setting. Colour rendering is Ra 80 and rated life is 30,000 hours. The Beno Eco range carries other sizes and outputs if a brighter or larger fitting is needed for the same look.
Specification
| Power |
20W |
| Voltage |
220-240 AC |
| Luminous flux |
1450 (WW) / 1600 (NW) / 1500 (CW) lm |
| Colour temperature |
3000/4000/6500K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
110° |
| IP rating |
IP65 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted |
| Lifespan |
30,000 hours |
| Shape |
Round |
| Dimensions |
Ø200 × 55 mm |
| Weight |
354 g |
| Material |
Pp |
| Finish |
Black |
Downloads
Frequently Asked
Can it be used outdoors?
Yes. The Beno Eco is rated IP65, which means it is weatherproof and suitable for exposed outdoor positions and wet locations. It can be fitted to a covered porch, an external wall or an open soffit, as well as indoors in a bathroom or utility room.
What size room or area does it light?
With up to 1600 lumens spread through a wide 110° beam, it covers around 5 m² at general lighting levels. That suits a porch, small hallway, compact bathroom or utility space where one even pool of light is needed.
How do I change the colour temperature?
The fitting is colour selectable across 3000K warm white, 4000K neutral white and 6500K cool daylight white, chosen on the fitting itself. Set the warm tone for a softer entrance or the cool tone for a cleaner, brighter wash in a work or wash area.
How should I clean it?
Wipe the polypropylene body with a soft damp cloth and a mild detergent, avoiding abrasive pads or solvents that could mark the black finish. Make sure the fitting is switched off and cool first, and that the surface is dry before power is restored.