Beno Eco Ø200 12W Round LED Ceiling Light Colour Selectable IP65 - Black

The Beno Eco is a round LED ceiling light running 12W direct from 220-240V mains, giving 1050 lumens at 3000K warm white, 1150 at 4000K neutral white or 1100 at 6500K cool white from its colour selectable output. The 110 degree beam spreads light broadly across the space below, and the integrated LED removes any replaceable bulb. Across the Atlantic this style sits with the flush mount LED ceiling fixtures, fitting tight to the surface with a low 55mm depth and a 200mm round diameter.

Sitting close to the surface, the Beno Eco suits porches, covered walkways, utility rooms, bathrooms, hallways and entrance lobbies where a discreet round fitting is wanted. At general lighting levels its output covers around 4 m², so it works well as a single point of light over a porch step, a small landing or a shower area, and several can be spaced through a longer covered passage. The shallow profile keeps it unobtrusive on lower ceilings, and it mounts equally to a wall or a ceiling.

Built from polycarbonate with a black finish, the Beno Eco carries an IP65 rating, so it is sealed against dust and water jets and is rated for exposed outdoor and fully wet positions as well as indoors. It runs straight off mains voltage with no separate driver to specify, and it is not dimmable, switching tone between the three colour temperatures instead. The fitting weighs just 344g and is rated for 30,000 hours of use. Wall or ceiling mounting hardware is included, and the Beno range carries further sizes and outputs to match across a scheme.

Can the Beno Eco be used outdoors?

Yes. It carries an IP65 rating, meaning it is sealed against dust and direct water jets, so it is suitable for exposed outdoor positions, porches, covered walkways and fully wet locations as well as indoor rooms. It is equally at home in a bathroom or utility area.

How much area does it light, and how many do I need?

At 1050 to 1150 lumens depending on the tone selected, it lights around 4 m² at general lighting levels. That makes it ideal as a single fitting over a porch, small landing or shower zone, while a longer hallway or covered passage benefits from two or more spaced evenly along its length.

How do I change the colour temperature?

The Beno Eco is colour selectable across 3000K warm white, 4000K neutral white and 6500K cool white, set on the fitting at installation. Warm white gives a softer entrance glow, while cool white suits a brighter utility or bathroom space.

How do I clean it?

Wipe the polycarbonate cover with a soft, slightly damp cloth and let it dry before switching back on. Avoid abrasive pads or solvents, which can dull the black finish. Because it is sealed to IP65, the cover keeps dust and moisture out between cleans.