Description
The Beno is a square LED ceiling light built for wet and exposed positions, drawing 24 or 30W from a 220-240V AC supply with no separate driver to specify. Output is selectable, reaching up to 2690, 2940 or 2880 lm depending on the setting, and the colour temperature switches across 3000K, 3500K and 4000K so the same fitting can run warm or neutral white. A wide 110 degree beam spreads light evenly rather than spotting one area, and across the Atlantic this style of fixed surface fitting is what buyers tend to look for under flush mount led ceiling light listings.
The 110 degree spread and roughly 2900 lm output suit covers of around 9 to 10 m² at general lighting levels, which fits a covered porch, a utility area, a small bathroom, a shed or a sheltered entrance. Its IP65 rating means it copes with direct splashing and damp, so it works in spots a standard indoor ceiling light could not handle. The fitting mounts to either a ceiling or a wall, giving flexibility for low soffits and eaves as well as flat ceilings, and the even wash keeps shadows down across the whole space.
Construction is polycarbonate in an anthracite finish, a tough housing that stands up to outdoor knocks and weathering while keeping the IP65 seal. The square form measures 260 × 260 × 57 mm and weighs 966 g, with an integrated LED rated to 50,000 hours, so there is no bulb to replace over its life. This model is not dimmable and runs direct from mains AC. The Ra 80 colour rendering gives natural enough tones for everyday and utility use, and the range includes further outdoor-rated fittings in matching finishes.
Specification
| Power |
24 / 30W |
| Voltage |
220-240 AC |
| Luminous flux |
max 2690 / 2940 / 2880 lm |
| Colour temperature |
3000/3500/4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
110° |
| IP rating |
IP65 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted |
| Lifespan |
50,000 hours |
| Shape |
Square |
| Dimensions |
260 × 260 × 57 mm |
| Weight |
966 g |
| Material |
Polycarbonate |
| Finish |
Anthracite |
Downloads
Frequently Asked
What size space does it light?
With a wide 110 degree beam and up to around 2940 lm, it covers roughly 9 to 10 m² at general lighting levels. That makes it a good fit for a porch, utility room, small bathroom or sheltered entrance where you want an even wash rather than a tight spot.
Can it be used outdoors?
Yes. Its IP65 rating means it is weatherproof and handles direct splashing and wet conditions, so it is suitable for exposed outdoor and damp locations such as covered entrances, eaves and porches.
Does it have a replaceable bulb?
No, the LED is integrated and rated to 50,000 hours, so there is no separate bulb to change. The whole fitting is designed to run for many years before replacement is needed.
How do I clean it?
Wipe the polycarbonate housing with a soft, slightly damp cloth and avoid harsh solvents that could mark the anthracite finish. Make sure the fitting is switched off and cool first, and do not use abrasive pads on the diffuser.