Beno 260x260 24-30W Colour Selectable IP65 LED Ceiling Light - White

The Beno is a square LED ceiling light measuring 260 x 260 mm, running directly from 220 to 240V AC with no separate bulb to fit. Power is switchable between 24W and 30W, giving up to 3180, 3490 or 3410 lumens depending on the setting, and the colour temperature is selectable across 3000K, 3500K and 4000K so the tone moves from warm to a brighter neutral white. With a wide 110 degree spread and a Ra 80 colour rendering figure, it lays down even, general illumination rather than a tight beam. North American buyers searching for a flush mount LED ceiling light will recognise this low-profile round-format fitting, here in a compact square housing only 57 mm deep.

Because it carries an IP65 rating, the Beno suits exposed and wet locations as well as dry interiors, making it a practical choice for porches, covered walkways, utility rooms, bathrooms, garages and external soffits. At general lighting levels it covers around 11 to 12 m², which makes it well matched to a small to mid-sized room, an entrance area or a sheltered outdoor zone. The 57 mm depth keeps it close to the surface, so it works on standard ceiling heights without dropping noticeably into the space, and the wall-mount option lets it double as an exterior wall fitting where overhead mounting is not possible.

The body is moulded polycarbonate in a white finish, an impact-tolerant material that holds up to outdoor exposure and is easy to wipe clean. It mounts to a wall or ceiling and runs straight from mains voltage, so no external transformer is required. The integrated LED is rated for 50,000 hours and the fitting is not dimmable, so it is best paired with a standard switched circuit. The Beno range also includes other outputs and sizes for matching a scheme across indoor and sheltered outdoor positions.

How big a space will this light cover?

At its 30W setting the Beno gives up to around 3490 lumens, which lights roughly 11 to 12 m² at general lighting levels. That suits a small to mid-sized room, a hallway or a sheltered outdoor area. For a larger space you would add a second fitting.

Can it be used outdoors?

Yes. The Beno is rated IP65, so it is protected against dust and water jets and is suitable for exposed outdoor and wet locations such as porches, walkways and bathrooms. It can be mounted on either a wall or a ceiling to suit the position.

Does it have a replaceable bulb?

No, the LED is integrated into the fitting and runs directly from 220 to 240V AC, so there is no separate lamp to change. The module is rated for 50,000 hours of use, which is many years in a typical setting before output begins to fade.

How do I clean it?

Switch the light off and let it cool, then wipe the polycarbonate housing with a soft, damp cloth. Avoid abrasive pads or solvents, which can dull the white finish. For outdoor units, an occasional clean clears away dust and grime that would otherwise reduce brightness.