Beno 24-30W Ø260 Round LED Ceiling Light Colour Selectable PIR Sensor IP65 - White

The Beno is a round LED ceiling light measuring Ø260 by 57 mm, with a built-in PIR sensor that brings the fitting on as movement is detected. Power is switchable between 24W and 30W, giving a maximum output of around 3230 to 3530 lm depending on the setting, and the colour temperature is selectable across 3000K, 3500K and 4000K to suit the mood of the space. The wide 110 degree beam spreads light evenly rather than spotting a single point. Buyers searching for a flush mount LED ceiling light will find this sits close to the surface for a low-profile finish.

The wide beam and PIR control make the Beno a good fit for spaces where hands-free light is useful, such as porches, covered entrances, utility areas, stairwells and outbuildings. At its brighter setting it covers around 11 to 12 m² at general lighting levels, so it works well as the main light in a hallway, a small landing or an entrance area. It mounts to a wall or a ceiling, which helps on low ceilings where a deeper pendant would feel intrusive, and the sensor suits routes that are walked through rather than lingered in. The selectable white lets you match a warmer tone for living areas or a cooler one for task-led spaces.

Built from polycarbonate with a white finish, the Beno is rated IP65, so it is sealed against dust and water jets and is suitable for exposed outdoor and wet locations as well as indoor use. It weighs 762 g and runs on 220 to 240V AC mains. The integrated LED is rated for 50,000 hours and is not replaceable as a separate bulb, while the colour rendering of Ra 80 gives natural-looking light. This fitting is not dimmable. The Beno range includes further round fittings in matching styling for a consistent look across connected spaces.

What room size does it light?

At its 30W setting the Beno gives a maximum of around 3530 lm, which covers roughly 11 to 12 m² at general lighting levels. That makes it suitable as the main light in a hallway, small landing, porch or utility area. The 24W setting gives a softer output for smaller spaces.

How does the PIR sensor work?

The built-in PIR detects movement and switches the light on automatically, then off again after a set period of no activity. This makes it well suited to porches, entrances and stairwells where hands-free lighting is convenient. It removes the need to find a switch when carrying things or arriving in the dark.

Can it be used outdoors?

Yes. The Beno is rated IP65, meaning it is sealed against dust and direct water jets, so it is suitable for exposed outdoor and wet locations such as covered entrances and external walls. It can equally be used indoors in damp areas like utility rooms.

How do I clean it?

Wipe the polycarbonate housing with a soft, slightly damp cloth and a mild detergent, then dry it off. Avoid abrasive cleaners or solvents, which can dull the white finish. Make sure the fitting is switched off and cool before cleaning.