Beno 24-30W Ø260 Round Colour Selectable IP65 Ceiling Light - Anthracite

The Beno is a round ceiling light built for damp and exposed locations, switchable between 24W and 30W to suit how much light a space needs. It delivers up to 2850, 3120 or 3050 lumens depending on the colour temperature chosen, across a wide 110 degree spread that washes a surface evenly rather than picking out one spot. Colour selectable across 3000K, 3500K and 4000K, it moves from a warm domestic tone to a cleaner neutral white. Buyers in the US would recognise it as a flush mount LED ceiling light, the kind fitted tight to the ceiling line in a porch or utility area.

Outdoor porches, covered walkways, garages, sheds and bathroom ceilings all suit this fitting, since its weatherproof rating lets it sit where splashes and damp air would rule out an indoor light. At general lighting levels the higher output covers around 10 m², which works well for a single car bay, a modest porch ceiling or a small utility room. The 110 degree beam and tight 57 mm depth mean it sits close to the ceiling and lights the area below without harsh shadows, so it copes equally on lower ceilings where a deeper fitting would feel intrusive.

The body is moulded polycarbonate in an anthracite finish, a material chosen for outdoor fittings because it resists impact and weathering better than glass. It carries an IP65 rating, sealing the LEDs against dust and water jets, and its integrated LED array is rated for around 50,000 hours, so there is no bulb to replace over its life. The fitting can be wall or ceiling mounted and is not dimmable, running directly from a 220-240V AC supply. The Beno range covers matching outputs and tones for pairing across linked outdoor and utility areas.

What size room or area does it light?

At its 30W setting the Beno gives up to 3120 lumens, which covers roughly 10 m² at general lighting levels. That suits a single garage bay, a covered porch or a small utility room. Stepping down to 24W lowers the output where a softer level is wanted.

Can it be used outdoors?

Yes. It is rated IP65, meaning it is sealed against dust and direct water jets, so it is suitable for exposed outdoor positions, porches, covered walkways and wet areas such as bathroom ceilings. The polycarbonate body is built to handle damp and impact.

Does it use a replaceable bulb?

No, the Beno uses an integrated LED array rather than a removable lamp. It is rated for around 50,000 hours of use, so the light source is designed to last the life of the fitting. There is nothing to change once it is installed.

How do I clean and maintain it?

Wipe the polycarbonate diffuser with a soft damp cloth and a little mild detergent, then dry it off. Avoid abrasive pads or solvents, which can dull the surface. Make sure the fitting is switched off and cool before cleaning.