Description
The Beno is a square surface-mounted LED ceiling light running on 220 to 240V mains, with switchable output of 12W or 18W delivering up to 1770 lumens. Colour temperature is selectable across 3000K, 3500K and 4000K, letting you set a warmer or cooler tone to suit the setting. A wide 110 degree beam spreads light evenly rather than throwing a tight pool, and the integrated LED array does away with any replaceable bulb. North American buyers will recognise this format as a flush mount LED ceiling light, sitting tight against the surface with no protruding fitting.
The compact 220 by 220mm footprint suits porches, covered entrances, utility areas, garages and smaller hallways or bathrooms where a discreet fitting is wanted. At its top setting it covers around 5 to 6 m² at general lighting levels, which makes it a sensible choice for a single small room or a sheltered doorway rather than a large open space. The wide beam and modest size mean it pairs well with low and standard ceiling heights, where a broad even wash is more useful than a directional source. Its IP65 rating also allows it to go on exposed external walls and in wet zones.
Construction is polycarbonate throughout in an anthracite finish, which stands up well to outdoor exposure and resists yellowing better than many plastics. The IP65 rating means it is sealed against dust and protected from water jets, so it can be wall or ceiling mounted in fully exposed and wet locations. This is a non-dimmable fitting, switched on and off rather than adjusted, and it is rated for 50,000 hours of use. The Beno range includes further sizes and output options for matching a scheme across indoor and outdoor areas.
Specification
| Power |
12 / 18W |
| Voltage |
220-240 AC |
| Luminous flux |
max 1630 / 1770 / 1750 lm |
| Colour temperature |
3000/3500/4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
110° |
| IP rating |
IP65 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted |
| Lifespan |
50,000 hours |
| Shape |
Square |
| Dimensions |
220 × 220 × 57 mm |
| Weight |
752 g |
| Material |
Polycarbonate |
| Finish |
Anthracite |
Downloads
Frequently Asked
Can the Beno be used outdoors?
Yes. It carries an IP65 rating, meaning it is fully dust-tight and protected against water jets from any direction. This makes it suitable for exposed external walls, porches, covered entrances and wet indoor areas such as bathrooms and utility rooms.
What size room or area does it light?
At its 18W setting the Beno produces up to 1770 lumens, covering around 5 to 6 m² at general lighting levels. That suits a small room, a porch or a sheltered doorway, and the wide 110 degree beam spreads the light evenly across the space.
Does it take a replaceable bulb?
No. The Beno uses an integrated LED array rather than a separate lamp, so there is no bulb to change. It is rated for 50,000 hours of use, which is many years at typical domestic run times before the unit needs replacing.
How should it be cleaned?
Switch off the supply and let the fitting cool, then wipe the polycarbonate housing with a soft damp cloth. Avoid solvents and abrasive cleaners, which can mark the anthracite finish. The IP65 seal allows gentle cleaning of outdoor units without water ingress.