Description
The Beno is a square surface-mounted LED ceiling light that runs on switchable output, giving 12W or 18W depending on the setting and producing up to around 2000 lumens. American buyers shopping for a flush mount LED ceiling light will recognise the format: a slim, low-profile fitting that sits tight against the ceiling with no protruding bulb. Colour temperature is selectable across 3000K, 3500K and 4000K, so the same fitting moves from a warm domestic tone to a cleaner neutral white. The wide 110 degree beam spreads light evenly rather than focusing it, which suits a general ambient role.
Rated IP65, the Beno is weatherproof and happy in exposed outdoor and wet locations, making it a sound choice for porches, covered entrances, bathrooms, utility rooms and sheltered external walls. At its top output it covers around 6 to 7 m² at general lighting levels, enough for a small room, a hallway landing or an entrance area. The integrated LED gives consistent coverage from a single point, so for larger spaces you would simply run more than one fitting. Its compact 220mm square footprint and low 57mm depth let it tuck onto lower ceilings and tighter wall positions without dominating them.
The body is moulded polycarbonate in a clean white finish, a material that shrugs off damp and resists the knocks of a busy entrance or utility space. The integrated LED is rated for 50,000 hours, removing any bulb-changing, and the fitting is not dimmable, so it pairs with a standard switch rather than a dimmer. Mounting is flexible, working on both ceiling and wall, and colour temperature is set on the fitting itself before installation. The Beno range carries further models in the same square styling for matching across rooms.
Specification
| Power |
12 / 18W |
| Voltage |
220-240 AC |
| Luminous flux |
max 1840 / 2000 / 1980 lm |
| Colour temperature |
3000/3500/4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
110° |
| IP rating |
IP65 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted |
| Lifespan |
50,000 hours |
| Shape |
Square |
| Dimensions |
220 × 220 × 57 mm |
| Weight |
752 g |
| Material |
Polycarbonate |
| Finish |
White |
Downloads
Frequently Asked
Can the Beno be used outdoors?
Yes. It carries an IP65 rating, which means it is weatherproof and suitable for fully exposed outdoor and wet locations. It works well on porches, covered entrances and external walls, as well as bathrooms and utility rooms indoors.
How large a room will it light?
At its top output of around 2000 lumens it covers roughly 6 to 7 m² at general lighting levels, which suits a small room, hallway or entrance area. For larger spaces, run more than one fitting to keep the light even.
Does it have a replaceable bulb?
No. The Beno uses an integrated LED rated for 50,000 hours, so there is no bulb to change. When the LED eventually reaches the end of its life the whole fitting is replaced.
How do I clean it?
Wipe the polycarbonate surface with a soft, slightly damp cloth and avoid abrasive cleaners that could mark the white finish. Always switch off and let the fitting cool first. Its sealed IP65 construction makes it easy to keep clean in damp locations.