Description
The Beno is a round LED ceiling light that runs at a selectable 12W or 18W, giving up to 2080 lumens of output from a compact Ø220 mm body. A colour selectable design lets you pick between 3000K, 3500K and 4000K, moving from a warmer domestic glow through to a cleaner neutral white. The wide 110 degree beam spreads light evenly across the space below rather than pooling in one spot, and at 57 mm deep it sits close to the surface it mounts to. American buyers shopping for a flush mount LED ceiling light will recognise the same low-profile, surface-fixed format here.
Across a typical room this fitting covers around 6 to 7 m² at general lighting levels, which makes it a sensible single source for a small hallway, porch, utility area or compact bathroom. Because the body is rated for exposed and wet conditions, it suits sheltered and open outdoor positions as well as damp interior spots, so it works equally on a covered entrance ceiling or an external wall. Mounted flat to a ceiling it gives broad downward spread, while the wall option lets you place it beside a door or along a passage. It pairs well with low ceilings given its slim depth.
Construction is moulded polycarbonate in a white finish, a hard-wearing combination that copes with knocks and damp far better than a glass or metal alternative. The IP65 rating means it is sealed against dust ingress and low-pressure water jets, so it stays reliable in rain-exposed and wash-down locations. The integrated LED is rated for 50,000 hours and is not designed to be replaced, and this model is not dimmable, running direct from a 220 to 240V AC supply. Both wall and ceiling mounting are supported from the single fixing arrangement. Other round and outdoor fittings in the Beno range share this weatherproof build.
Specification
| Power |
12 / 18W |
| Voltage |
220-240 AC |
| Luminous flux |
max 1920 / 2080 / 2060 lm |
| Colour temperature |
3000/3500/4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
110° |
| IP rating |
IP65 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted |
| Lifespan |
50,000 hours |
| Shape |
Round |
| Dimensions |
Ø220 × 57 mm |
| Weight |
616 g |
| Material |
Polycarbonate |
| Finish |
White |
Downloads
Frequently Asked
How big a room will it light?
At up to 2080 lumens it covers around 6 to 7 m² at general lighting levels, which suits a small hallway, porch, utility space or compact bathroom. For larger areas you would use more than one unit to keep the light even.
Can it be used outdoors?
Yes. It carries an IP65 rating, meaning it is sealed against dust and protected against low-pressure water jets, so it is suitable for exposed outdoor and wet locations as well as damp interiors. It works on both covered and open external ceilings and walls.
Does it use a replaceable bulb?
No, the LED is integrated into the fitting and is not designed to be swapped out. It is rated for 50,000 hours of use, which is many years at typical domestic running times before the whole unit would need replacing.
How do I clean it?
Wipe the polycarbonate cover with a soft, damp cloth and a mild detergent, then dry it off. Avoid abrasive pads or harsh solvents, as these can dull the white finish over time. Always isolate the supply before cleaning.