Description
Five E27 lamps sit behind a wide, shallow shade on this drop flush fitting, so light washes across the ceiling instead of pooling in one bright spot. The outer face carries a silver leaf foil, the inner face a white laminate that bounces light back down into the room, and the plate and lamp holders are finished in polished chrome. At 50cm across it reads as a broad, low disc that fills the middle of a ceiling without dropping into head height.
This is one we reach for in rooms where a pendant would hang too low: a landing, a hallway under a modest ceiling, a bedroom above the foot of the bed, or a squarer dining room that wants even light rather than a single pool over the table. The full set of lamps gives plenty of output for a busy family space, and with suitable lamps and a dimmer on the circuit the level can be taken down for the evening. We would use LED GLS lamps rated up to 20W each and set them all to the same warmth, since the shade lining shows up any mismatch.
The shade is a laminated drum with the foil applied to its outer wall, and the chromework beneath is bright enough to pick up the colours of the room around it. An occasional wipe with a dry microfibre cloth keeps the chrome clear of fingerprints, while the foil face wants nothing more than light dusting, no sprays and no solvents. Keep it to dry rooms well away from steam and splashing. It carries a one year warranty. Elsewhere in the Baymont range we stock smaller universal plates in satin nickel, antique brass and satin black as well as linear pendants, so a hall, a landing and a kitchen can all be kept in step. Lamps are not included.
Specification
| Colour |
Polished Chrome |
| Second Colour |
Silver Foil |
| Weight |
1.60KG |
| Diameter |
500mm |
| Height |
200mm |
| Body Height |
180mm |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
5 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (GLS A60) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Silver Leaf & White Laminate |
| Cup Dimensions |
D:120mm x H:25mm |
| Cable Information |
3 x 0.75mm Clear Double Insulated Cable |
| Number of Shades |
1 |
| Pieces Included |
1 |
| Unassembled |
Yes-Shades To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size lamps should I fit?
Five E27 lamps, with LED GLS A60 the shape we would choose. Keep each one to 20W or less.
Can it be dimmed?
Yes, provided you fit dimmable lamps and a compatible dimmer on the circuit. Neither the lamps nor a dimmer come with the fitting.
How far does it drop below the ceiling?
The overall height is 200mm, so it sits close to the ceiling and suits rooms where a hanging fitting would be in the way.
What colour is the shade?
The outside is a silver leaf foil and the inside a white laminate, which keeps the light soft and slightly warm as it reflects back down.
How wide is it?
500mm in diameter, which is generous for a flush fitting and best suited to a hall, landing or medium to large room.
How should I clean it?
Dust the shade lightly and buff the chrome with a dry microfibre cloth. Avoid cleaning sprays, polishes and damp cloths on the foil surface.