Description
Five E27 lamps sit behind a wide faux silk drum shade in white, held on a satin nickel frame that keeps the whole fitting close to the ceiling. At 45cm across it reads as a broad, calm circle of light rather than a hanging shape, and the white laminate lining pushes the output down into the room. The proportions are generous while the drop stays short.
We reach for this one where a pendant would hang too low: hallways and landings, bedrooms under a standard ceiling, or a dining table in a room that cannot carry a long flex. With lamps spread right across the frame it gives an even wash from a single point, so it can often do the work of a central fitting and a side lamp together. It will dim, given suitable lamps and a dimmer, which makes it easy to soften for the evening. Warm white LED GLS lamps are what we would put in it.
The shade is faux silk over a white laminate liner, so the surface stays even and the colour sits happily against white or off white plaster. The metalwork is a soft satin nickel, bright enough to pick up daylight but without the hard shine of chrome. Go over the shade with a soft brush now and then and keep a dry cloth for the frame, and keep both away from damp, as this is a dry indoor fitting only. It carries a one year warranty. The Baymont range runs wider than this piece: single lamp semi flush fittings in satin nickel, antique brass, polished chrome and satin black, white universal flush fixtures, and linear pendants where you want length rather than width. Lamps are not included.
Specification
| Colour |
Satin Nickel |
| Second Colour |
White |
| Weight |
1.60KG |
| Diameter |
450mm |
| Height |
350mm |
| Body Height |
180mm |
| Materials Used |
Terylene with Cotton Fabric, PVC Lining, Iron |
| Adjustable Height |
No |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
5 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (GLS A60) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Frame Hole Size |
27/42mm |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
White & White Laminate |
| Cup Dimensions |
D:120mm, H:25mm |
| Bracket Dimensions |
L:110mm , W:20mm, T:1.2mm |
| Shade Material |
Terylene with Cotton, PVC, Metal Frame |
| Shade Shape |
Cylinder |
| Shade Included |
Yes |
| Number of Shades |
1 |
| Pieces Included |
1 |
| Unassembled |
Yes-Shades To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size is it?
The shade measures 450mm in diameter and the fitting stands 350mm overall, with the metal body accounting for 180mm of that.
Which lamps does it take, and what is the maximum wattage?
It takes five E27 lamps, up to 20W each. LED GLS (A60) lamps are the recommended choice.
Can it be dimmed?
Yes, with dimmable lamps and a compatible dimmer. Neither the lamps nor a dimmer are supplied.
What is the shade made from?
A faux silk outer in white with a white laminate lining inside, on a satin nickel frame.
How should I clean it?
Brush the fabric gently to lift dust and use a dry cloth on the nickel. Avoid sprays and damp cloths on the shade.
Is it suitable for a bathroom?
No. It is rated IP20, so it belongs in dry rooms only.