Description
Five E27 lampholders sit on a shallow round plate finished in satin nickel, each arm angled outward so the shades you pick have room to breathe. At 28cm across, the plate stays compact while the holders spread wide enough to read as a cluster rather than one central point. It holds close to the ceiling, with just enough drop to give the fitting a little depth. The shade choice is left open, and that is the appeal: fabric drums for something soft, metal cones for a crisper line. The shade is not included; see our lamp shades.
We reach for this where a pendant would hang too low, so hallways with a run of doors, bedrooms under a lower ceiling, or a small dining room above a round table. Spreading the light across several points gives a broader wash than a single lamp does, which suits rooms wanting even light rather than a bright pool in the middle. Each holder takes up to 20W, and with suitable lamps and a dimmer on the circuit the whole fitting can be brought down for the evening. Lamps are not included, and we would use LED GLS lamps here.
The satin nickel has a soft grey sheen that stays quiet against a white ceiling and does not throw hard reflections back at you. Fingermarks lift with a dry microfibre cloth; keep sprays and polishes away from the holders and the finish keeps its even tone. It is an earthed fitting for dry rooms indoors, wired to a normal household circuit. It carries a one year warranty. The range also runs to a smaller semi flush in satin nickel, linear pendants in the same finish, and further versions in polished chrome, white, antique brass and satin black, so a hallway and a landing can be matched without repeating the same fitting twice.
Specification
| Colour |
Satin Nickel |
| Ceiling Mountable |
Yes |
| Weight |
0.99KG |
| Diameter |
280mm |
| Height |
330mm |
| Materials Used |
Iron |
| Adjustable Height |
No |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
5 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (GLS A60) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Included |
No |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size shades does it take?
The shade is not supplied - pick one from our lamp shades. The holders are the standard E27 type, so shades made for E27 lampholders will sit on them. Keep each shade narrow enough that the five do not touch across the 28cm plate; small drums, coolies and metal cones all work well.
Which lamps should I use?
LED GLS lamps in the A60 shape with an E27 cap, up to 20W each. Lamps are supplied separately.
Can it be dimmed?
Yes, provided you fit dimmable lamps and pair them with a compatible dimmer on the circuit.
How far does it hang below the ceiling?
The fitting stands 330mm tall overall, so it stays close to the ceiling and keeps head height clear in a hallway.
How should I clean it?
Switch off at the wall and let everything cool, then wipe the satin nickel with a dry soft cloth. Avoid cream cleaners and abrasive pads, which will dull the sheen.
Is it suitable for a bathroom?
No. It is rated for dry indoor rooms only, so keep it to hallways, bedrooms, landings and living spaces.