Description
Five lamps sit behind a single shade here, which is what gives this pendant its even, unfussy spread of light. The outer shade is faux silk in grey, lined with a white laminate that pushes light back down, and the underside is closed with a frosted acrylic diffuser so the lamps are not seen directly. The metalwork is finished in satin nickel, a soft grey-toned sheen that lets the shade stay the centre of attention. At 40cm across, it reads as a proper main light rather than a small accent.
It suits rooms that want real output from one ceiling point: over a dining table, in a wide hallway, in a sitting room with height to spare, or above a stairwell where the drop can be let right out. The suspension extends to roughly 3.3m and shortens for ordinary ceilings, so the same fitting can hang low over a table or high in a void. We would put warm white LED GLS lamps in it, and if you want the light softer in the evening it will dim with suitable lamps and a compatible dimmer, neither of which comes with it.
Fabric over a laminate liner, an acrylic diffuser and satin nickel metal make up the whole fitting, and it carries a one year warranty. Take dust off the shade with a soft brush or a vacuum on its lowest setting, and wipe the diffuser with a barely damp cloth when it starts to look dull, keeping moisture away from the laminate lining. Satin nickel runs through the wider Baymont range as well, in a linear pendant for long tables and a small semi flush fitting for lower ceilings, so a dining room and the hall beyond it can be kept in step. Lamps are not included.
Specification
| Colour |
Satin Nickel |
| Second Colour |
Grey |
| Weight |
1.80KG |
| Diameter |
400mm |
| Minimum Drop |
405mm |
| Maximum Drop |
3330mm |
| Body Height |
315mm |
| Materials Used |
Terylene with Cotton Fabric, PVC Lining, Iron |
| Adjustable Height |
Yes |
| Hanging Method |
Cable |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
5 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (GLS A60) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Frame Hole Size |
27/42mm |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Grey & White Laminate |
| Cup Dimensions |
D:120mm x H:25mm |
| Bracket Dimensions |
L:115mm x W:20mm x H15mm |
| Cable Information |
3 x 0.75mm Clear Double Insulated Cable, L:2650mm |
| Shade Material |
Terylene with Cotton, PVC, Metal Frame |
| Shade Shape |
Cylinder |
| Shade Included |
Yes |
| Number of Shades |
1 |
| Pieces Included |
1 |
| Unassembled |
Yes-Shade To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamps does it take and how many?
It takes five E27 lamps, each up to 20W. LED GLS (A60) is the shape we would choose, and lamps are supplied separately.
How far down will it hang?
The drop runs from 405mm at its shortest to 3330mm fully extended, so it can be set close under a low ceiling or dropped a long way into a stairwell.
How big is the shade?
The shade measures 40cm in diameter by 18cm deep, with an overall body height of 315mm.
Can it be dimmed?
Yes, with dimmable lamps and a matching dimmer. Neither the lamps nor the dimmer is included.
What is the diffuser made of?
Frosted acrylic, set into the base of the shade with a satin nickel trim, so it softens the light and hides the lamps from view.
Is it suitable for a bathroom?
No. It is rated IP20 and belongs in dry rooms such as dining rooms, halls, landings and bedrooms.