Description
Three lamps sit behind a broad drum shade, finished in silver leaf with a white laminate lining that keeps the light clean and even as it falls. The polished chrome body holds that shade close overhead, so the fitting reads as a shallow disc rather than something hanging down into the room. At 40cm across it has enough presence to anchor a ceiling without crowding it, and the bright metal keeps the whole thing looking light.
We reach for this where a pendant would hang too low: landings, hallways, bedrooms and small dining rooms with ceilings on the lower side. The E27 lampholders spread light widely from a single point, and each takes up to 20W, which is plenty for a bedroom or a hall without asking for another fitting nearby. It will dim, given suitable lamps and a compatible dimmer, so the level can drop in the evening. Anyone fitting out a spare room or a rental will find it does a good deal without demanding much attention.
The metalwork is polished to a bright chrome, and the silver leaf shade catches that brightness in a softer way, with the white laminate inside doing the work of reflecting. To keep it looking well, run a dry brush or a soft vacuum attachment over the shade now and then, and wipe the chrome with a barely damp cloth once the fitting is switched off and cool. It carries a one year warranty. Elsewhere in the range there are smaller semi flush fittings in antique brass, satin nickel and satin black, along with linear pendants for a row of lamps over a table. Lamps are not included.
Specification
| Colour |
Polished Chrome |
| Second Colour |
Silver Foil |
| Weight |
1.30KG |
| Diameter |
400mm |
| Height |
375mm |
| Body Height |
170mm |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
3 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (GLS A60) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Silver Leaf/White Laminate |
| Cup Dimensions |
D:120mm, H:25mm |
| Number of Shades |
1 |
| Pieces Included |
1 |
| Unassembled |
Yes-Shades To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size is the shade?
The shade measures 400mm in diameter and 18cm deep, with an overall fitting height of 375mm.
Which lamps should I use?
It takes three E27 lamps, up to 20W each. LED GLS A60 lamps are the recommended choice, and they are not supplied with the fitting.
Can it be dimmed?
Yes, provided you use dimmable lamps and a compatible dimmer. No dimmer is included.
What is the shade made from?
It is a silver leaf finish over a white laminate, so the inner face reflects light back down into the room.
How do I clean it?
Switch the fitting off and let the lamps cool, then dust the shade with a soft brush and wipe the chrome with a barely damp cloth. Avoid abrasive creams on the polished metal.
Is it suitable for a bathroom?
No. It is rated IP20 and intended for dry rooms such as bedrooms, hallways and living rooms.