Description
A wide, shallow shade in gold leaf sits beneath an antique brass body, its white laminate inner face throwing light back down into the room. At 50cm across, it reads as a broad, bright disc close to the ceiling rather than anything that hangs. Three E27 lampholders share the space behind the shade, so light spreads across the width of the fitting instead of gathering in a single hot spot. The brass has an aged, softly warm tone that plays well against the gold of the shade.
We would choose this where a ceiling sits too low for a pendant and a flush fitting would feel flat: landings, hallways, generous bedrooms and dining rooms in flats and older cottages. The width gives it enough presence to anchor a table or the head of a stairwell, while the shallow depth keeps it clear of tall doors and wardrobe fronts. LED GLS lamps are the sensible choice, up to 20W each, and dimming is possible if you pair suitable lamps with a compatible dimmer; no dimmer is supplied.
The body and frame carry an antique brass finish, with a gold foil face on the shade and a pale laminate lining. Keep it looking well by dusting the shade lightly with a clean, dry brush and buffing the brass now and then; the laminate should not be wetted. Power down at the wall before you go near it for lamp changes. It carries a one year warranty. Across the Baymont range we also stock smaller semi flush fixtures and linear pendants in the same antique brass, so a hall and a dining room can be kept in step. Lamps are not included.
Specification
| Colour |
Antique Brass |
| Second Colour |
Gold Foil |
| Weight |
1.40KG |
| Diameter |
500mm |
| Height |
375mm |
| Body Height |
170mm |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
3 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (GLS A60) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Gold Leaf & White Laminate |
| Cup Dimensions |
D:120mm, H:25mm |
| Number of Shades |
1 |
| Pieces Included |
1 |
| Unassembled |
Yes-Shades To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How big is this ceiling light?
The shade measures 500mm in diameter with an overall height of 375mm, of which the brass ceiling body accounts for 170mm.
Which lamps do I need?
It takes three E27 lamps, rated to a maximum of 20W each. LED GLS (A60) lamps are recommended, and lamps are not supplied with the fitting.
Can I put it on a dimmer?
Yes, provided you use dimmable lamps and a dimmer rated for them. No dimmer is included.
Is it suitable for a low ceiling?
It is, being a semi flush design with a total drop of 37.5cm, so it stays well clear of head height in most rooms.
How should I clean the gold leaf shade?
Dust it gently with a dry, soft brush or cloth. Avoid water and sprays on the laminate lining, and wipe the brass with a dry cloth only.