Description
A shallow satin nickel plate with three E27 lampholders on short stems, this is a fitting sold as a starting point rather than a finished look: the shades are yours to choose. The plate measures 25cm across, so the holders sit fairly close together and a cluster of small shades reads as one soft group rather than a row of separate lights. Being semi flush, it keeps everything tucked up near the ceiling. The shade and the lamp are not included; see our lamp shades.
We would fit this where a hall, landing or small bedroom needs more light than a single lamp gives but has no room for a pendant dropping into head height. It suits anyone who already has shades they like, or who wants to pick fabric to match curtains and blinds and change it again later. Dimming is possible where both the lamps and the dimmer are suitable, which makes it a sensible choice for a sitting room corner or a bedroom you want soft at night. Each holder is intended for a lamp up to 20W, and an LED GLS is what we would put in it.
The satin nickel finish has a low sheen that shows fingerprints far less readily than bright chrome, so it stays looking tidy with very little attention. An occasional pass with a dry duster over the plate and the stems is all it asks; leave metal polishes and sprays out of it, as they can dull the finish over time. It carries a one year warranty. Within the wider Baymont range we also stock a smaller version of the same plate in this finish, along with linear pendants in satin nickel and flush fittings in white and polished chrome, so a whole house can be kept in step while each room takes its own shades.
Specification
| Colour |
Satin Nickel |
| Ceiling Mountable |
Yes |
| Weight |
0.79KG |
| Diameter |
250mm |
| Height |
330mm |
| Materials Used |
Iron |
| Adjustable Height |
No |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
3 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (GLS A60) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Included |
No |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How many shades will I need?
The shade is not supplied - pick one from our lamp shades. Three, one for each E27 holder. Small shades work best at this diameter, so they sit alongside each other without touching.
What lamps does it take?
Three E27 screw-fit lamps, each rated up to 20W. An LED GLS in the A60 shape is the recommended choice.
How far does it hang below the ceiling?
The fitting is 330mm tall overall before shades, with a 250mm diameter plate at the ceiling.
Can it be dimmed?
Yes, provided you use dimmable lamps together with a dimmer switch suited to them.
Is it suitable for a bathroom?
No. It is rated IP20, which makes it a fitting for dry rooms such as bedrooms, halls and living rooms.
How should I clean it?
Switch the light off at the wall and wipe the plate and stems with a soft dry cloth. Avoid solvents and metal polish.