Description
Three E27 lampholders sit in a line along a slim satin nickel bar, waiting for whichever shades you choose to hang on them. It is sold as the fitting alone, so the character comes entirely from what goes on top: fabric drums for something soft, glass or open metal frames for something sharper. The suspension reaches 3m at full length and can be set up shorter, which is really the point of it. We reach for this one in tall rooms where a single small pendant would simply get lost. The shade and the lamp are not included: the photographs show our Sigma Lamp Shade 30cm, one of the lamp shades we sell separately.
A linear bar earns its keep over a kitchen island or a long dining table, where separate pools of light cover the length far better than one central fitting can. The narrow width keeps it reading as a line rather than a block when you see it from the side. It also suits a converted loft or a stairwell landing with plenty of height above your head. Lamps go up to 20W each, and with dimmable lamps and a compatible dimmer on the circuit you can drop the level right down for the evening.
Bar and holders share the same satin nickel finish, a soft grey sheen that sits happily alongside brushed steel appliances and pale walls. When it needs attention, isolate the circuit, let the lamps cool, then draw a dry cloth along the bar and around each holder; sprays and metal polishes will only dull that sheen over time. It carries a one year warranty. We stock the same bar in polished chrome and antique brass, and in a shorter drop for rooms with less height, and the wider range carries flush and semi-flush fittings on the same universal principle for low ceilings.
Specification
| Colour |
Satin Nickel |
| Ceiling Mountable |
Yes |
| Weight |
2.70KG |
| Length |
950mm |
| Width |
100mm |
| Minimum Drop |
280mm |
| Maximum Drop |
3000mm |
| Materials Used |
Iron |
| Adjustable Height |
Yes |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
3 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (GLS A60) |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Included |
No |
| Pieces Included |
1 |
Frequently Asked
How long is the bar itself?
The bar measures 95cm long and 10cm wide, which is why it suits island units and rectangular dining tables rather than a small square hallway.
What is the shortest drop I can set?
It can be shortened to 28cm from the ceiling and extended to a maximum of 3m, so it works on standard and very high ceilings alike.
Which lamps should I use?
Three E27 lamps, one per holder, rated no higher than 20W each. LED GLS A60 lamps are the sensible choice here.
Can it be dimmed?
Yes, provided you fit dimmable lamps and pair them with a dimmer switch suited to the lamps you have chosen.
Are shades supplied with it?
The shade is not supplied - pick one from our lamp shades. No. The holders take a wide variety of shades, so you pick those to suit the room and buy them alongside the fitting.
Is it suitable for a bathroom?
No, it is rated IP20 and belongs in dry rooms such as kitchens, dining rooms and living spaces.