Description
A slim antique brass bar holds three lamps in a row, each one under a gold leaf shade with a white laminate lining. Below the shades sits a frosted acrylic diffuser finished with an antique brass rim, which softens the output and keeps the lamps out of direct view from below. The shades are 30cm across, and the suspension is adjustable, so the bar can hang well down over a table or be shortened to sit far closer to the ceiling.
We find a linear pendant like this earns its keep over a long dining table or a kitchen island, where a single central fitting tends to leave the ends of the run in shadow and the middle glaring. Spreading the light along the length covers the whole surface far more evenly. It takes E27 lamps and we would choose LED GLS globes here, which give a broad, even glow behind frosted acrylic. Dimming is possible where the lamps and the dimmer are matched to one another. The fitting is wired for an ordinary household supply and is meant for dry rooms indoors.
The bar, the lamp holders and the diffuser rim are metal in an antique brass finish, warm and slightly softened rather than bright, and the gold leaf shade faces pick that warmth up while the white lining bounces light straight down. To clean, switch off at the wall and let things cool, then take the dust off the shade faces with a dry brush and wipe the brasswork and the acrylic with a soft cloth, keeping polishes and abrasives away from both. If you want the same look tight against the ceiling instead, the wider range runs to white and polished chrome flush fittings with faux silk, gold leaf and silver leaf shades. It carries a one year warranty. Lamps are not included.
Specification
| Colour |
Antique Brass |
| Second Colour |
Gold Foil |
| Weight |
4.10KG |
| Length |
1190mm |
| Width |
300mm |
| Minimum Drop |
405mm |
| Maximum Drop |
2125mm |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
3 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (GLS A60) |
| Unassembled |
Yes-Shades To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Gold Leaf/White Laminate |
| Cup Dimensions |
D:50mm x H:35mm |
| Plate Dimensions |
L:920mm, W:70mm, H:20mm |
| Number of Shades |
3 |
| Pieces Included |
1 |
Frequently Asked
How far down does it hang?
The drop is adjustable between 405mm and 2125mm, so it can sit close to the ceiling or fall low over a dining table.
How long is the bar?
It measures 1190mm along its length and 300mm across, with each shade 30cm in diameter and 17cm deep.
What lamps does it take?
Three E27 lamps, up to 20W each. An LED GLS A60 shape is the one we would fit.
Can it be dimmed?
Yes, provided you use dimmable lamps with a dimmer suited to them. No dimmer is supplied with the fitting.
What is the diffuser made from?
Frosted acrylic, held in an antique brass rim. Wipe it with a soft damp cloth only, as solvents and abrasive creams will mark the surface.