Description
Sand black gives this recessed square a quiet, matt look against a pale ceiling, dark enough to read as a shadow rather than a fitting. The trim measures 9.2cm across, sized for an 80mm cut-out, so the visible frame stays slim. Inside, the lampholder swivels, which lets you tilt the beam off vertical and aim it where the light is actually wanted. It takes a GU10 lamp up to 50W, and the lampholder is included.
We reach for these where a room needs light placed rather than spread: art on a chimney breast, a run of shelving, a stretch of worktop, the length of a hallway. Because the head angles, a line of them can be set out evenly and then pointed at different targets, keeping the ceiling orderly while the light does something more considered. It suits kitchens, living rooms, bedrooms and landings, and dry rooms generally rather than a shower zone or anywhere open to the weather. With dimmable lamps and a compatible dimmer it will dim, though neither lamp nor dimmer is supplied.
The body is double insulated, and the black finish is an even matt that hides fingermarks better than a polished trim would. To clean, switch off, wait for the lamp to lose its heat, then run a dry cloth around the visible frame; keep moisture away from the lampholder and sprays away from the paint. It carries a one year warranty. We stock the same square trim in aluminium and matt white, and the round version in sand black, aluminium, matt white and satin nickel with chrome, so a scheme can stay consistent as it moves from room to room. Lamps are not included.
Specification
| Colour |
Sand Black |
| Ceiling Mountable |
Yes |
| Wall Mountable |
Yes |
| Weight |
0.14KG |
| Length |
92mm |
| Width |
92mm |
| Height |
24mm |
| Cut Out |
80mm |
| Materials Used |
Die-cast Aluminium |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
1 x GU10 50W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size lamp does it take?
One GU10, rated up to 50W. A 50mm reflector LED is the sensible choice and is what we would fit.
How far does the head tilt?
The lampholder is on a swivel, so the beam can be angled away from vertical to pick out a picture, a shelf or a worktop rather than the floor directly below.
What cut-out do I need?
80mm. The trim itself is 92mm square, giving a small overlap around the aperture.
How deep is the fitting?
The body stands 24mm behind the trim, which is shallow as recessed fittings go.
Can I dim it?
Yes, with a dimmable GU10 lamp and a dimmer suited to it. Neither is supplied with the downlight.
Is it suitable for a bathroom?
It is rated IP20, so keep it to dry rooms and away from splash zones.