Description
A small square recessed light with a tilting head, so the beam can be angled away from vertical instead of dropping straight down. The visible face is 92mm square and sits shallow against the ceiling line, giving a crisp squared edge where a round trim would read softer. It takes a single GU10 lamp and the lampholder is already fitted. We would choose an LED reflector lamp here, which suits the swivel head and keeps the light tight and controlled.
Being aimable, it is the one we reach for over worktops, along a run of shelving, or where light needs to fall on a picture rather than the floor beneath it. Several across a kitchen ceiling can be turned to work together, and in a hallway or landing the same trick lifts the light off the carpet and onto the walls. It is sized for an 80mm cut-out and accepts lamps up to 50W. Dimming is possible provided the lamp itself is a dimmable type and a suitable dimmer is used.
The frame and face are finished in plain aluminium, quietly grey rather than bright, and the fitting is double insulated. It is meant for dry rooms inside the house, so bathroom zones and covered porches call for something rated higher. To clean, isolate the circuit, wait for the lamp to lose its heat, then draw a dry cloth over the face and around the trim; solvents and cream cleaners will dull the finish. It carries a one year warranty. We stock the square version in matt white and sand black as well, and the same swivel head with a round face if you prefer curves, which makes mixing shapes between rooms straightforward. Lamps are not included.
Specification
| Colour |
Aluminium |
| Ceiling Mountable |
Yes |
| Wall Mountable |
Yes |
| Weight |
0.15KG |
| Length |
92mm |
| Width |
92mm |
| Height |
24mm |
| Cut Out |
80mm |
| Materials Used |
Die-cast Aluminium |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
E |
| Lamp |
1 x GU10 50W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size hole does this fitting need?
It is made for an 80mm cut-out, with a 92mm square face that covers the opening and a body depth of 24mm behind it.
Which lamp should I use?
A GU10 lamp with a 50mm reflector body, up to a maximum of 50W. An LED version is the sensible choice for everyday use.
Can I dim it?
Yes, as long as you fit a dimmable GU10 lamp and pair it with a compatible dimmer switch. Neither the lamp nor the dimmer is supplied.
How far does the head tilt?
The inner ring swivels within the square frame, letting you aim the beam off centre to wash a wall, worktop or picture rather than lighting straight downwards.
Is it suitable for a bathroom?
No. It is rated IP20, so keep it to dry indoor rooms such as kitchens, hallways and living spaces.
Does it come with a warranty?
It carries a one year warranty from the manufacturer.