Description
A compact recessed spotlight with a tilting inner ring, so light can be aimed off vertical rather than dropped straight down. The visible face is satin nickel with polished chrome, a quiet metal pairing that sits happily against pale plaster and painted timber alike. It takes one GU10 lamp of up to 50W and drops into an 80mm cut-out, with a shallow body behind the ceiling line. We would put an LED reflector lamp in it, and where you want the level adjustable, choose a dimmable one.
Aiming is the point of it. Angle a run of them across a kitchen worktop, wash a hallway wall, or turn one towards shelving or a picture so the light lands where you want it rather than on the floor below. The narrow trim keeps a ceiling calm when several sit in the same line, which is why we reach for this one in open-plan rooms and long landings. The wiring is double insulated, and it works on the ordinary household mains. Rooms that stay dry are its place; over a bath or in a shower zone you want a sealed fitting instead.
The finish carries evenly around the ring where it meets the ceiling, and the fitting is light in the hand. To clean, switch off at the wall and let the lamp go cold, then run a dry cloth round the trim; keep sprays and cream polishes away from the lampholder. It carries a one year warranty. The lampholder is supplied; lamps are not. The same round face is offered in aluminium, matt white and sand black, and there is a square version in the range if you prefer straight edges to a circle.
Specification
| Colour |
Satin Nickel |
| Second Colour |
Polished Chrome |
| Ceiling Mountable |
Yes |
| Wall Mountable |
Yes |
| Weight |
0.12KG |
| Diameter |
92mm |
| Height |
24mm |
| Cut Out |
80mm |
| Materials Used |
Die-cast Aluminium |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
E |
| Lamp |
1 x GU10 50W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size hole does it sit in?
The cut-out is 80mm, with a visible face of 92mm across, so the trim overlaps the opening all round.
How deep is the fitting?
The body stands 24mm high, which makes it one of the shallower GU10 downlights we stock.
Can I dim it?
Yes, provided you use a dimmable lamp and a compatible dimmer switch. Neither the lamp nor a dimmer is included.
Which lamp works best in it?
An LED reflector lamp with a 50mm face, GU10 socket, rated no higher than 50W.
How far does the head tilt?
The inner ring swivels within the trim so the beam can be angled towards a wall, worktop or picture rather than straight down.
Is it suitable for a bathroom?
No. It is rated IP20 for dry rooms, so choose a sealed downlight for bath and shower zones.