Description
Five slender arms curve out from a central stem, each ending in an upturned lampholder, and the frame measures 45cm across. It arrives without shades, so the lamps themselves do the decorating: E14 candle lamps sit neatly in the holders and keep the open, airy look the frame is drawn for. The satin nickel finish is soft rather than mirror-bright, a quiet silver-grey that sits happily against pale walls and warm wood alike. We would fit clear candle lamps for a little sparkle, or opal ones where a gentler, more even light is wanted. The lamps are not included, and the photographs show it inside our Serena Lamp Shade 60cm in Ivory Pearl, a drum sold separately; its candle holders will take clip-on shades from our lamp shades.
It suits a dining table, a landing, or a sitting room where a bare lamp on a flex feels thin. A 1.5m chain comes with it, and the drop can be set shorter or longer to suit the room and whatever sits beneath. Light spreads sideways rather than falling in one narrow pool, which makes it useful in squarer rooms and over round tables. Fit dimmable lamps and it will work on a dimmer, giving you a brighter setting for eating and a low one for later in the evening. Keep it to dry indoor rooms; a hallway or kitchen is fine, a bathroom is not.
The frame and arms are metal, finished in satin nickel, with the flex running down through the chain. Dust gathers on the upper faces of the arms, so an occasional pass with a dry duster keeps it looking fresh; let the lamps cool before you handle them, and keep sprays and cream cleaners away, as they will dull the finish over time. It carries a one year warranty. Because the holders are left bare, you can change its character later with a set of small clip-on shades, or simply leave them off. Lamps are not included.
Specification
| Colour |
Satin Nickel |
| Ceiling Mountable |
Yes |
| Weight |
1.70KG |
| Diameter |
450mm |
| Minimum Drop |
340mm |
| Maximum Drop |
1800mm |
| Materials Used |
Iron |
| Adjustable Height |
Yes |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
5 x E14 20W max (lamps not included) |
| Lamp Cap |
E14 |
| Recommended Lamp |
LED (Candle C35) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Included |
No |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
Which lamps should I use with it?
It takes five E14 candle lamps, and LED candle lamps in the C35 shape are the natural choice. Each holder takes up to 20W.
Can I put it on a dimmer?
Yes, provided you fit dimmable lamps. Standard non-dimmable LEDs will flicker or buzz on a dimmer circuit.
How far down does it hang?
The drop runs from 340mm at its shortest to 1800mm at its longest, using the 1.5m chain supplied.
Does it come with shades?
No, the lampholders are left open. Small clip-on or E14 shades can be added if you would rather soften the look. Choose one from our lamp shades.
How wide is it?
It is 450mm in diameter, so allow that much clearance around the fitting when planning where it will hang.
How do I keep the satin nickel looking good?
A dry or barely damp soft cloth is all it needs. Avoid abrasive pads and chemical cleaners, which mark the satin surface.