Description
Five slender arms curve out from a central stem and turn upward at their tips, each finishing in a bare lampholder. Across the widest point it spans 45cm, which gives it presence without much bulk, and the antique brass has the softened, slightly darkened tone that keeps a finish from looking brand new. Candle lamps are the natural choice, and because nothing hides them the shape of the glass becomes part of the look. We would reach for clear glass here, though a warm opal will calm the sparkle in a smaller room. The lamps are not included, and the photographs show it inside our Serena Lamp Shade 60cm in Ivory Pearl and Serena Lamp Shade 60cm in Nude Beige, drums sold separately; its candle holders will take clip-on shades from our lamp shades.
It hangs on chain, and 1.5m of it comes with the fitting, so the height can sit low over a dining table or well clear of heads in a hallway. It suits rooms where a single small shade would look mean: a landing, a square dining room, a bedroom with ceiling height to spare. We would keep the arms a little above eye level where the table is in daily use. Dimming works provided the lamps you fit are dimmable themselves, worth knowing if it is doing the evening work over a table rather than lighting the whole room.
The antique brass finish carries across the arms and the central stem, matching in tone from top to tip. Dust gathers along the top of each curve, so run a soft duster over them when you pass; if the brass wants more, turn the power off, wipe with a barely damp cloth and dry it straight away, leaving polishes and sprays out of it. Keep it to dry rooms, away from bathrooms and anywhere steam collects. It carries a one year warranty. We stock it in antique brass, and lamps are not included.
Specification
| Colour |
Antique Brass |
| Ceiling Mountable |
Yes |
| Weight |
1.70KG |
| Diameter |
450mm |
| Minimum Drop |
340mm |
| Maximum Drop |
1800mm |
| Materials Used |
Iron |
| Adjustable Height |
Yes |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
5 x E14 20W max (lamps not included) |
| Lamp Cap |
E14 |
| Recommended Lamp |
LED (Candle C35) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Included |
No |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
Does it come with a shade?
No. The shade is not included and the one in the photographs is shown for illustration; choose one from our lamp shades.
What lamps does it take?
Five E14 candle lamps, the C35 shape, at up to 20W each. LED candles are the sensible pick and they are not supplied with the fitting.
How far does it hang down?
The drop adjusts from 340mm at its shortest to 1800mm at its longest, using the 1.5m of chain supplied.
How wide is it?
It measures 450mm in diameter, so allow a clear 45cm circle when planning where it will sit.
Can I put it on a dimmer?
Yes, as long as every lamp you fit is a dimmable type and the dimmer suits LED loads.
Is it suitable for a bathroom?
No. It is rated IP20 and belongs in dry rooms only.
How heavy is the fitting?
1.7kg net, without lamps.