Description
Three arms rise from a satin nickel centre and sit inside one wide shade, so light spreads across the full width rather than pooling in a single spot. The shade measures 50cm across and is finished in silver foil on the outside with a white lining, which softens the light on its way down. The satin sheen on the metal is quiet rather than bright, so the frame reads as part of the shade rather than competing with it.
We reach for this one over a dining table or a round breakfast table, where a broad shade balances the shape below it. It also suits a hallway with height to spare, or a landing where a narrower fitting would look mean. The chain gives you scope to set the drop to the room, and we would hang it so the lower edge of the shade sits above eye level for anyone seated beneath. It will dim if you fit dimmable lamps and a compatible dimmer, neither of which comes with it, and it needs an earthed supply at the ceiling point.
The frame is metal under the satin nickel finish, and the shade is a laminate build carrying the silver foil face. For care, take a dry soft cloth or a clean brush to the outside of the shade and work around the arms rather than leaning on them; keep sprays and damp cloths away from the metal so the satin surface stays even. It takes small screw-cap E14 candle lamps, and we would fit warm white LED candles here, which is what we stock them for. It carries a one year warranty. Lamps are not included, so add three when you order.
Specification
| Colour |
Satin Nickel |
| Second Colour |
Silver Foil |
| Weight |
2.10KG |
| Diameter |
500mm |
| Minimum Drop |
340mm |
| Maximum Drop |
1800mm |
| Body Height |
220mm |
| Materials Used |
Terylene with Cotton Fabric, PVC Lining, Iron |
| Adjustable Height |
Yes |
| Hanging Method |
Chain |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
3 x E14 20W max (lamps not included) |
| Lamp Cap |
E14 |
| Recommended Lamp |
LED (Candle C35) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Silver Leaf & White Laminate |
| Cup Dimensions |
D:90mm, H:25mm |
| Bracket Dimensions |
L:75mm, W:20mm, T:1.5mm |
| Shade Material |
Terylene with Cotton, PVC, Metal Frame |
| Shade Shape |
Cylinder |
| Shade Included |
Yes |
| Number of Shades |
1 |
| Pieces Included |
1 |
| Unassembled |
Yes-Shades To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size lamps does it take?
Three E14 small screw-cap lamps, up to 20W each. LED candle lamps in the C35 shape suit the arms best.
How far down does it hang?
The drop is adjustable from 340mm to 1800mm, so you can set it to the ceiling height and the table below.
Can it be dimmed?
Yes, provided you fit dimmable lamps and a suitable dimmer switch. Neither is supplied with the pendant.
How wide is the shade?
500mm across and 220mm deep, which is generous enough to sit comfortably over a dining or breakfast table.
Is it suitable for a bathroom?
No. It is rated IP20 and belongs in dry rooms such as dining rooms, hallways and bedrooms.
How should the silver foil shade be cleaned?
Dry dusting only, with a soft cloth or a soft brush. Avoid water, solvents and polish, as the foil face is a laminated finish.