Description
Three lamps sit under a single wide shade here, so the light spreads broadly rather than pooling in one spot. The stem and base are finished in polished nickel, bright and reflective, while the shade above is wrapped in silver foil with a white lining that keeps the light kind as it passes through. At 50cm across, the shade is generous enough for the whole lamp to read clearly from the other side of a room. A foot switch on the flex means you can turn it on and off without stooping.
We would put it beside a sofa or a deep armchair, where its 1.6m height lifts the shade above a seated sightline and drops light onto a book or a lap. It suits a sitting room corner that a central fitting never quite reaches, and a larger bedroom where a softer, lower source is wanted in the evening. It takes small candle lamps, and with dimmable ones and a compatible dimmer on the circuit the level can be brought down; the dimmer is bought separately. It is one we reach for when a room needs both light and a little shine, without adding another piece of furniture.
The stem and base are metal, double insulated, with the shade sitting above them. To keep it right, run a soft brush over the shade now and then and give the nickel a wipe with a clean dry cloth; polishes and household sprays will dull plating over time, so leave those in the cupboard. It carries a one year warranty. Polished nickel and silver foil sit happily with grey upholstery, pale wood and off-white walls, and the shine repeats nicely if there is glass or mirror on a side table close by. Lamps are not included.
Specification
| Colour |
Polished Nickel |
| Second Colour |
Silver Foil |
| Weight |
5.70KG |
| Diameter |
500mm |
| Height |
1600mm |
| Materials Used |
PVC, Iron |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
3 x E14 20W max (lamps not included) |
| Lamp Cap |
E14 |
| Recommended Lamp |
LED (Candle C35) |
| Light Distribution |
Ambient |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Yes - Foot Switch |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Base Dimensions |
D:280mm x H:40mm |
| Cup Dimensions |
D:30mm x H:70mm |
| Shade Included |
Yes |
| Number of Shades |
1 |
| Base Material |
Iron |
| Pieces Included |
1 |
| Unassembled |
Yes-Shade To Be Attached |
| Installation |
Plug-in Item |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
Which lamps does it take?
Three E14 lamps, up to 20W each. An LED candle (C35) is the recommended choice, and lamps are supplied separately.
How is it switched on?
There is a foot switch on the flex, so it can be operated without reaching for the lamp itself.
Can it be dimmed?
Yes, provided you fit dimmable lamps and use a compatible wall dimmer. No dimmer is included.
What are the dimensions?
It stands 1600mm tall, and the shade measures 500mm in diameter by 200mm deep.
How should the shade be cleaned?
Dust it with a soft brush or a dry cloth only. Avoid water, solvents and sprays on the silver foil surface.
Is it suitable for a bathroom?
No, this one is for dry indoor rooms such as living rooms, studies and bedrooms.