Description
Plafond Backlight Full is a ceiling light in white. A shallow white drum sitting tight against the ceiling, its side a plain straight band and its underside closed by a recessed white diffuser set up inside the rim. A second, narrower white ring stands proud of the top face, so light escapes upward round it and washes the ceiling as well as the room. The drum's edge is square and crisp and the white is matt throughout. There is no pattern and no fixing visible from below. It is wide and low and reads as a disc laid flat on the ceiling. It measures 30cm across and 8.5cm tall, in plastic and metal.
Mounted flush it clears a doorway and a low ceiling, so a corridor, a landing or a small bedroom is its territory, and it lights the whole room evenly rather than pooling on one surface. It is the light you put in first and stop noticing, which is the point of a flush fitting: it does the general lighting so the lamps in the room can do the rest.
The LED is built in at 25W, so there is no bulb to buy and none to fit. It has 3 brightness settings, changed by switching off at the wall and straight back on, so no dimmer is needed. It is rated IP20, for dry indoor rooms. It carries an F energy label.
Specification
| Diameter |
30cm |
| Height |
8.5cm |
| Finish |
White |
| Material |
Plastic, metal, |
| Light Source |
Integrated LED |
| Power |
25W |
| Brightness Settings |
3 settings |
| Energy Class |
F |
| IP Rating |
IP20 |
| Suitable Location |
Indoor, dry rooms |
| Colour Temperature |
3000K |
| Luminous Flux |
2,194 lm |
Downloads
Instruction manual (PDF)
Frequently Asked
Do I need to buy a bulb?
No. The LED is built into the fitting, so there is nothing to buy and nothing to fit.
What happens when the LED fails?
The fitting is replaced rather than relamped. At 25W and normal domestic use that is many years away.
How do I change the brightness?
Switch off at the wall and straight back on. Each flick moves it to the next setting. No dimmer is needed.
Will it work on a dimmer?
It does not need one, and it should not be fitted to one. Brightness is controlled from the wall switch instead.
How bright is it at full?
Comparable to a 100W to 150W incandescent bulb at full, with the lower settings for evenings and a night light.
Can it go in a bathroom?
No. It is IP20, which covers dry interior rooms only. A bathroom needs IP44 or better.